Catalogs >
TQC Sheen BV >
ADHESION TEST KIT (HPK)

ADHESION TEST KIT (HPK)
2Pages

Catalog excerpts

Vision on quality www.tqc.eu TQC ADHESION TEST KIT (HPK) SP3100PRODUCT DESCRIPTION The TQC Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape, and the remaining paint on the wood with the illustrations classifying the damage from class 0 to 5. SCOPE OF SUPPLY • Delivery includes cutting tool, tape, knive, manual and reference chart. ACCESSORIES The Tape for Adhesion Test can be ordered separately as well. Tape Order code: SP3115 SPECIFICATIONS - Dimensions: 100 x 55 mm. - Adhesion Test Scales - Wet film thickness test (50-160pm, in steps of 10pm). - Levelling test (1, 1.5 and 2 mm) - Film applicator (0-180pm, in steps of 20pm). - Edge radius 2, 3, 4 and 5 mm TQCB.V. 2908 LL Capelle aan den IJssel phone:+31 (0)10-7900100 e-mail: info@tqc.eu

Open the catalog to page 1

SAFETY PRECAUTIONS • A knife is a sharp object. Be careful when using it. DISCLAIMER The right of technical modifications is reserved. The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. Whilst we endeavour to ensure that all advice we give about the product (whether in this sheet or otherwise) is correct we have no control over...

Open the catalog to page 2