B3S/M3S15 Series ACME SCREW SPECIFICATIONS B3S15 ENGLISH ACME SCREW SPECIFICATIONS
CRITICAL SPEED WITH 5/8" ENGLISH ACME SCREW CRITICAL SPEED WITH 3/4" ENGLISH ACME SCREW
60 35
MAX THRUST*: 200 LB MAX THRUST*: 800 LB MAX THRUST*: 800 LB
MAXIMUM STROKE MAXIMUM STROKE MAXIMUM STROKE MAX THRUST*: 300 LB MAX THRUST*: 800 LB MAX THRUST*: 800 LB
MAXIMUM STROKE MAXIMUM STROKE MAXIMUM STROKE RODLESS
B3S10SN05 B3S10SN05
B3S15SN01
B3S10SN05 B3S10SN05
B3S15SN02
B3S/M3S15 Series •English acme screwcritical speed capacities
and PV limits
SPEED (in/sec) SPEED (in/sec) 0.1110100 020406080100140 120 0.1110100 020406080100140 120
STROKE (in) STROKE (in)
PV LIMITS:5/8" 2TPI ENGLISH ACME SCREW 5/8" 2TPI ACME Screw PV Limits PV LIMITS:3/4" 1TPI ENGLISH ACME SCREW 3/4" 1TPI ACME Screw PV Limits
200 250
051015202530
THRUST (lb) B3S15SN02 B3S15SN02 B3S15SN02 THRUST (lb) B3S15SN01 B3S15SN01 B3S15SN01 300 350
01020304050 050100150 050100
150
200250
SPEED (in/sec) SPEED (in/sec)
35 40 60 70
SN = Solid NutSNA = Solid Anti-backlash Nut
!
* Maximum thrust is the maximum continuous dynamic thrust subject to Thrust x Velocitylimitation.
PV LIMITS: Any material which carries a sliding load is limited by heat buildup.The factors that affect
heat generation rate in an application are the pressure on the nut in pounds per square inch and the
surface velocity in feet per minute.The product of these factors provides a measure of the severity ofan application.P=ThrustxV=Speed< 0.1Max.Thrust RatingMax.Speed Rating
C-16
AXIDYNE ELECTRIC MOTION CONTROLFROM TOL-O-MATIC • 1-800-328-2174 • 763-478-8000 • www.tolomatic.com