VACQ II - TMI ORION

Catalogue VACQ II

www.tmi-orion.com

Page

/ 2

/ 2

See other catalogues for TMI ORION

Text version of the page

VACQ II

In its standard version, VACQ II enables the measurement of temperature in kilns for ceramics, tiles and bricks.

It has 8 or 16 thermocouple channels and is also available in Radio transmission version, for real time reading of data.

The logger is associated to a software designed for this industry. It allows to:

• visualize thermocouple temperature inside kilns and thus create a mapping, match wagon position in the kiln and temperature at corresponding location. By positioning the instruments (professional burner, door...) in the software, you can anticipate possible failures.

• Measurement range: up to 1200°C

• Operating range:

- Without thermal shield, from 0°C to 140°C

- With thermal shield, from 0°C to 250°C during 70 hours.

- Other thermal profiles upon request.

• Resolution:

- 0.03°C for Pt1000 / 0.2°C for type K manufacturer of thermocouples (full scale 1300°C)

Technical specifications

Material: 316 L Stainless steel

Dimensions: diameter 55 mm, length 120 mm without connector manufacturer Sensors:

- 1 Pt1000 type detection in the logger (for measurement inside the shield)

- 1 Pt1000 type sensor as reference channel (cold junction) in the interconnection box

- K type thermocouples Memory capacity:

26 100 acquisitions per measurement channel for the VACQ II 8 thermocouples 14 500 acquisitions per measurement channel for the VACQ II 16 thermocouples

Programmable acquisition rate: minimum 1 second, maximum 59 minutes and 59

seconds.

Programmable acquisition duration Programmable recording start from date High autonomy battery

High temperature battery pack replaceable by the user High communication speed. Non volatile memory (EEPROM)

01 3)

o o

o X

b -

Software operating conditions

• Data transfer with a communication interface connected to the serial or USB port.

• Operates under Windows® 98/Me/NT/2000/XP