| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Orthogonal Axes Specifications | | |
| | | |
| | | [Set designation] | | |
| | | Ball screw type | |
| | | BA2 - A3 - A2A R E - 40 40 00 - 0T 1 3 | | |
| | | | |
| | | |
| | | X-axis: Ball screw driven Side mounted motor | | |
| | | |
| | | Combined operation R: Right-handed L: Left-handed | | Axis 1 stroke | | Axis 2 stroke | | Controller | | Cable length 3 : 3m 9 : 9m 5 : 5m B : 11m 7 : 7m D : 13m | | |
| | | Y-axis: | | Ball screw driven Side mounted motor | | |
| | | |
| | | |
| | | 0: None 1: CA20-M10 2: CA10-M00B 3: CA10-M01B | | |
| | | 10 : 100mm | | 10 : 100mm | | |
| | | |
| | | |
| | | 90 : 900mm AO : 1000mm | | 80 : 800mm | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | [Specifications] | | |
| | | | | | | | | | | | X-axis | Y-axis | | | | Type of axis | BB30E-U □ -M20N- □ 0 | BB10E-U □ -M20N- □ 0 | | | | Stroke (in increments of 100 mm) | 100 ~ 1000mm | 100 ~ 800mm | | | | Maximum speed | 1,200 mm/s (Note 1) | 1,200 mm/s (Note 1) | | | | Positioning repeatability (mm) | ±0.01mm | | | | Lead of ball screw | 20mm | 20mm | | | | Motor output | 100W | 100W | | | | Resolution | 0.01mm | | | | | | | | | | |
| | | |
| | | Note 1: When the stroke is as given below, the maximum speed differs. | | |
| | | |
| | | | | | | | | | | | Stroke (mm) | Maximum speed (mm/s) | | | | X-axis | 700 | 1000 | | | | 800 | 800 | | | | 900 ~ 1000 | 600 | | | | Y-axis | 700 | 1000 | | | | 800 | 800 | | | | | | | | | | |
| | | |
| | | |
| | | Acceleration/deceleration time when the maximum speed is set: 0.48 sec. or over | | |
| | | |
| | | | | | | | | | | | | | | | | Maximum Payload (kg) | Y-axis stroke | | | | 100mm | 200mm | 300mm | 400mm | 500mm | 600mm | 700mm | 800mm | | | | 13.0 | 12.0 | 11.0 | 10.0 | 8.0 | 6.0 | 3.0 | 2.0 | | | | | | | | | | | | | | | | |
| | | |
| | | Note 1: The height of the flexible tube is an approximate value. 192.4 | | |
| | | R: Right-handed | | |
| | | |
| | | |
| | | 7.3 " 4.2 | | |
| | | |
| | | 4 2 | | |
| | | |
| | | 73 | | |
| | | |
| | | Detail "B" of T-slot Detail "C" ofT-slot Detail "D" ofT-slot Detail "E" ofT-slot | | |
| | | Detail "A" of T-slot | | |
| | | |
| | | |
| | | X I Y | | |
| | | 6 3 | | |
| | | |
| | | 3.6 5.7 Detail "F" ofT-slot Section offlexible tube | | |
| | | 10.5 . Detail "E" of T-slot | | |
| | | |
| | | |
| | | |
| | | 42.5 26 | | |
| | | Stroke Y+232 | | |
| | | |
| | | |
| | | T-slot for M4 hexagon nut (T-slot F) T-slot for M6 hexagon bolt (T-slot E) | | |
| | | T-slot for M4 hexagon nut (T-slot C) | | |
| | | |
| | | |
| | | T-slot for M4 hexagon nut (T-slot D) T-slot for M4 hexagon nut (T-slot E) T-slot for M4 hexagon nut (T-slot B) T-slot for M6 hexagon bolt (T-slot A) | | |
| | | Stroke X+263 | | |
| | | |
| | | |
| | | L: Left-handed | | |
| | | 2-0 5H7, depth 5, hole pitch 68±0.02 | | |
| | | |
| | | |
| | | I—I- "D CD | | |
| | | |
| | | | | |
| | | 8_: | | |
| | | |
| | | |
| | | Y-axis slider unit | | |
| | | |
| | | Stroke Y+232 | | |
| | | |
| | | T-slot for M4 hexagon nut (T-slot G) T-slot for M4 hexagon nut (T-slot F) T-slot for M6 hexagon bolt (T-slot E) | | |
| | | T-slot for M4 hexagon nut (T-slot C) T-slot for M4 hexagon nut (T-slot D) | | |
| | | |
| | | |
| | | T-slot for M4 hexagon nut (T-slot E) T-slot for M4 hexagon nut (T-slot B) T-slot for M6 hexagon bolt (T-slot A) | | |
| | | |
| | | 59 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |