| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Single Axis Specifications | | |
| | | |
| | | | | | | | | | | | | | [Set designation] | BA2 - | 50G - | LT - M 20 N - R0 | - 1 3 m | | | | | Long stroke axis | 1- | -P= | 1 1 | | | | | | Type of slider | Lead | Brake Stroke | Controller | Cable length | | | | | M: Medium slider | 20 : 20mm | N : Without brake See "Type designation" | 0 : None | 3 : 3m 9 : 9m | | | | | L: Long slider | | under "Stroke" of the | 1 : CA20 - M10 | 5 : 5m B : 11m | | | | | | | specifications. | 2 : CA10 - M00B | 7 : 7m D: 13m | | | | | | | 3 : CA10 - M01B | | | | | | | | | | | | | | |
| | | |
| | | [Specifications] | | |
| | | Ordered product: Confirm the delivery from us at every order entry. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | Motor | 400 W AC servo motor (absolute) | | | | Drive system | Ball screw (nut rotation type), thread outer diameter 20 mm | | | | Stroke (mm) (in increments of 100 mm) | Medium slider | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | 2400 | 2500 | | | | Type designation | B0 | C0 | D0 | E0 | F0 | G0 | H0 | J0 | K0 | L0 | M0 | N0 | P0 | Q0 | R0 | | | | Long slider | 1150 | 1250 | 1350 | 1450 | 1550 | 1650 | 1750 | 1850 | 1950 | 2050 | 2150 | 2250 | 2350 | 2450 | | | | | Type designation | B5 | C5 | D5 | E5 | F5 | G5 | H5 | J5 | K5 | L5 | M5 | N5 | P5 | Q5 | | | | | Maximum speed (mm/s) | Lead 20 mm | 1000 | | | | Maximum Payload (kg) Acceleration/deceleration time: 0.3 sec. | Horizontal transfer: 100 | | | | Positioning repeatability (mm) | ±0.05 | | | | Resolution (mm) | 0.01 | | | | Allowable static load moment (Nm) | Medium slider MR: 2080, MP: 2160, MY: 1820 Long slider MR: 2080, MP: 3150, MY: 2640 | | | | Master controller | Select from CA20-M40, CA10-M00B and CA10 - M01B. | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Notes: * The maximum Payload signifies a load exerted on top of the slider. Also refer to the dynamic load moment given in pages 220 to 227. * For the 400 W type, a regeneration discharge unit (ABSU-4000) is required, irrespective of Payload. * The acceleration/deceleration time represents the time until the axis reaches a programmed speed. | | |
| | | — o CD i < CD 13 | | |
| | | |
| | | [Axis designation] | | |
| | | BB50G - LT - M 20 N - R0 | | |
| | | |
| | | |
| | | |
| | | Type of slider M: Medium slider L: Long slider | | Lead | | Brake | | Stroke | | |
| | | |
| | | 20 : 20mm | | |
| | | N : Without brake | | |
| | | See "Type designation" under "Stroke" of the specifications. | | |
| | | |
| | | |
| | | |
| | | |
| | | BB50G-LT | | |
| | | |
| | | I. 10 w CO | | |
| | | |
| | | _8 co 13.5 | | |
| | | |
| | | LO | | |
| | | Dimen5ion"A"ofT-slot | | |
| | | |
| | | o 1 | | |
| | | |
| | | 6 | | |
| | | |
| | | |
| | | LO | | |
| | | 4-M8. depth 20 . 2-08H7. depth 8. hole pitch 140±0.02 , | | |
| | | |
| | | .58 | | |
| | | |
| | | 140 | | 20 | | |
| | | 78 | | |
| | | 3.6 | | |
| | | 1.5 | | |
| | | |
| | | |
| | | 180 | | |
| | | |
| | | Sectlonofflexlbleduct | | |
| | | Dimension "B"of T-slot | | |
| | | |
| | | |
| | | 159.6 | | |
| | | |
| | | 158 | | 180 | | |
| | | 208 | | |
| | | Flexible duct | | |
| | | |
| | | |
| | | 120.6 | | 12 | | |
| | | |
| | | LO CO CM | | |
| | | LM I | | |
| | | | O | | |
| | | |
| | | |
| | | m | | |
| | | | | | |
| | ■I"—i—"et | |
| | | |
| | | 5.6 MAX.80 | | |
| | | 5.6 | | T-slot range for M8 hexagon bolt | | |
| | | T-slot for M4 hexagon nut (T-slot B) T-slot for M8 hexagon bolt (T-slot A) | | |
| | | |
| | | |
| | | 90 | | | Stroke +543.2 | | |
| | | |
| | | | |
| | | |
| | | 33 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |