See other catalogues for
TLV Euro Engineering
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Process Float Series | | |
| | | |
| | | J10, JH15 | | |
| | | |
| | | | | | | | | | Medium-to-High Pressure | Extra Large Process | | | | Medium-to-High Temperature | Extra Large Heater | | | | | | | | | |
| | | Float Dynamic Principle: When a large quantity of condensate flows into the trap, the float rises immediately, opening the orifice (D wide. Condensate passes through the pilot orifice at a high velocity into the control chamber (D , where the pressure increases rapidly due to flashing condensate. The rapid expansion causes a force to be exerted on the piston, opening the large orifice instantly. As condensate discharges through the main orifice at high velocity, condensate in the equipment is induced into the trap for rapid discharge. | | |
| | | |
| | | I Application: Large Re-Boiler | | |
| | | |
| | | JH15 | | |
| | | |
| | | |
| | | | | | | | | | No. | Description/Material | | | | © | Body/Stainless (J10) or Cast Steel (J10, JH15) | | | | w | Cover/Cast Iron (J10) or Cast Steel (J10, JH15) | | | | © | Float/Stainless Steel | | | | © | Valve Seat/- | | | | t | Air Vent/Stainless Steel | | | | | | | | | |
| | | J10 | | |
| | | J10 | | |
| | | |
| | | |
| | | |
| | | JL Series | | |
| | | |
| | | | | | | | | | Low-to-Medium Pressure | Extra Large Process | | | | Medium Temperature | Extra Large Heater | | | | | | | | | |
| | | • Extremely durable, inline repairable cast iron or cast steel float trap for low-to-medium pressure. ^ Automatic X-element air vent for fast start-up. ^ Large double-seated valve with heat treat hardened working surfaces. • Excellent resistance to water hammer. ^ Inline inlet and outlet. | | |
| | | |
| | | I Application: Large Re-Boiler | | |
| | | |
| | | JL14-X | | |
| | | |
| | | |
| | | | | | | | | | No. | Description/Material | | | | © | Body/Cast Iron (JL9X, JL14-X) or Cast Steel (JLH9X, JLH14-X) | | | | w | Cover/Cast Iron (JL9X, JL14-X) or Cast Steel (JLH9X, JLH14-X) | | | | © | Float/Stainless Steel | | | | © | Lever Unit/Stainless Steel | | | | | Trap Unit/Stainless Steel | | | | © | X-element Air Vent/Stainless Steel | | | | | | | | | |
| | | JL14-X | | |
| | | |
| | | |
| | | | | | | | | | | | | | | Model | J10 | JH15 | JL9X | JLH9X | JL14-X | JLH14-X | | | | Connection* | F | F | S,F | S,W,F | S,F | S,W,F | | | | Max. Allowable Pressure PMA (psig) | 250 | 710 | 250 | 450 | 250 | 250 | | | | Max. Allowable Temperature TMA (°F) | 428 | 800 | 428 | 464 | 428 | 750 | | | | | | | | | | | | | | |
| | | |
| | | : S = screwed, W = socket weld, F = flanged | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |