Separators - TLV Euro Engineering - #2

Text version of the page

PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS): Maximum Allowable Pressure (MPaG) PMA: 1.57 (DC3S-10, 16/DC3A), 1.6 (DC5S/DC5A), 2.1 (DC3S-21), 2.5 (DC7) Maximum Allowable Temperature (°C) TMA: 220 (DC3S/DC3A/DC5S/DC5A), 300 (DC7) Internet World Wide Web URL http://www.tlv.com Pamphlet M2800 Rev. 5/2006 Specifications subject to change without notice. Manufacturer Kakogawa, Japan is approved by LRQA Ltd. to ISO 9001/14001 ISO 9001/ ISO 14001 (M) 881 Nagasuna, Noguchi, Kakogawa, Hyogo 675-8511 JAPAN Phone: 079-427-1818 Fax: 079-425-7033 E-mail: tlv-japan@tlv.co.jp To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. CAUTION Local regulations may restrict the use of this product to below the conditions quoted. CONSTRUCTION(DC3S) FEATURES AND BENEFITS 100 98 96 94 92 90 10 100 20 30 × 1 MPa = 10.197 kg/cm2 * Do not use for toxic, flammable or otherwise hazardous gases. Body (Ductile Cast Iron) Screen (15-50mm)* (Stainless Steel) Separator (Stainless Steel) CONDENSATE ENTRAINED IN STEAM AND AIR WILL BE REMOVED WITH 98% EFFICIENCY. Float (Stainless Steel) Trap Valve Seat (Stainless Steel) * Screen for sizes 65-100 mm is in Trap Cover 1. Cyclone-Effects Separator: (Patented) 2. Free-Float Trap: (DC7 needs a separate trap) �œ Provides condensate separation efficiency as high as 98%. �œ Improves productivity and product quality with dry, high-quality steam/air. �œ Continuously discharges condensate as it is separated. �œ Provides a complete seal, even under no load conditions, with its precision ground spherical float and positive three-point seating. OPERATION SPECIFICATIONS 1 2 Fluid enters the inlet of the separator, and a complex series of fins changes the steam, air or gas flow into a high-speed cyclone flow, separating even mist-like condensate. The separated condensate accumulates at the bottom, lifting the float off the valve seat and discharging condensate continuously. FLOW VELOCITY AND EFFICIENCY (Accuracy: ±2%; Condensation : 40~50kg/h) Condensation Separation Rate (%) Steam Flow Velocity (m/sec) Separation rate (%) is given as: quantity of condensate discharged quantity of incoming condensate During Separation During Discharge Model Type Connection Screwed Flanged Screwed Screwed Flanged Screwed Screwed Socket Welded Flanged Sizes Body Material Steam Separator Trap Air Separator Trap Steam, Air, Gas* Separator Orifice No. (Built-in Trap) Max. Operating Pressure (MPaG) PMO Max. Differential Pressure (MPa) ÄPMX (Built-in Trap) Max. Operating Temperature (°C) TMO 15, 20, 25 15, 20, 25, 32, 40, 50, 65, 80, 100 15, 20, 25 15, 20, 25 15, 20, 25, 32, 40, 50, 65, 80, 100 15, 20, 25 15, 20, 25, 40, 50 Cast Iron or Ductile Cast lron Bronze Cast Iron Bronze Stainless Steel 21 16 10 10 - 21 1.6 1.0 1.0 2.5 2.1 1.6 1.0 1.0 - 220 220 100 100 300 DC3S DC5S DC3A DC5A DC7