Dima Hybrid pick & place HP110 - TLC - #1

Text version of the page

IPC ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES MEMBER To improve your productivity QUALITY SINCE 1986 "The HP-100 series is a flexible, full vision, automatic, Pick and Place machine equipped with the ESI vision alignment" Specifications Dimensions Hybrid Base l.w.h.off-line = 1700 x 1500 x 2200mm in-line = 1200 x 1500 x 2200mm Board thickness-size min. 0.5mm - max. 4.5mm thick min. 30 x 30mm - off-line max. 330 x 450mm in-line max 300 x 500mm Maximum Warpage 0.5mm up - 1mm down Component Height Top max. 16mm - bottom max. 30mm Placement Accuracy ±50ìm at 3 sigma with 1ìm encoders Placement Rate Up to 4,600 cph IPC rated 6000 cph on tact time Components Chip, MELF, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, LCC, ìBGA, etc. smallest pitch 0.3mm Component Size 0201 up to field of view of 42 x 42mm wide (prepared for 01005) Motion X and Y, AC / DC servo motors with Linear encoder and digital motion controller Control Integrated microprocessor controller with CAN interface combined with PC running on Windows® Interface Fully SMEMA compatible, Conveyor height 865 to 970mm Feeder Characteristics Intelligent feeders, in-line 88 / off-line 132 - 8 or 12mm tapes, 132 / 198 - plastic sticks, number of trays depending on PCB size, tape feeders from 8 to 44mm, plastic stick up to 50mm wide, tray 335 x 185mm Vision System ESI Correctplace®, Automatic board alignment - full vision component alignment and analysis by vision system. Test on lead pitch, sqew angle, BGA bal size and number of balls Cameras 1 Fiducial and 2 component align cameras with CCD chip Power-Air Requirement 220 VAC / 50 - 60Hz / 2500 Watt 6 Bar / 85 PSI / 80 L/Min. Operating Temperature 18 - 30º Celsius Noise Level Noise emission during operation < 70 dB(A), Weight 450kg without feeders 800kg with feeders Axis Characteristics Increment Maximum Speed Maximum Acceleration X 0.001mm 3 m/s 3G Y 0.001mm 3 m/s 3G Z 0.02mm 3 m/s - Theta 0.045 degr. - - Your Distributor Specifications are subject to change without prior notice. HP0710E DIMA SMT Systems NL B.V Beukelsdijk 2 5753 PA Deurne The Netherlands Tel: +31 493 352 752 Fax: +31 493 352 750 Email: sales@dimasmt.nl Web: www.dimasmt.com