800 Series Flowmeter
2Pages

{{requestButtons}}

Catalog excerpts

800 Series Flowmeter - 1

The 800 series flowmeter is designed to give high performance and competitive pricing with 6 flow ranges from 0.05 to 15 L/min. Its totally non-metallic wetted components makes this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept two hose sizes 8mm and 12mm although for OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the ‘O’ ring seal is typically Viton®. • Laboratory tests • Cooling equipment • Active flow alarms • Semiconductor plant • Engine test • Food and beverage FEATURES • Low cost • PVDF or PP body • 1- 2% FSD • Sapphire bearings • Hall Effect sensor • 6 Flow ranges • Pulse output (NPN Std) • Pulse output (PNP Option) • 10 Bar rating • Viton® seal as standard • 8mm and 12mm hose • 0.1% Repeatability • 4.5 to 24Vdc • -25°C Min to 125°C Max • IP67 • NSF Certified for use in food and beverage production

Open the catalog to page 1
800 Series Flowmeter - 2

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout. There are two temperature options 125°C or 60°C. The 60°C unit is fitted with two LEDs to monitor the power and pulse output, both NPN and PNP transistor outputs are...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages