Catalogs >
Titan Enterprises >
OG6 Oval Gear Meter

OG6 Oval Gear Meter
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET OG6 200L/Min Oval Gear Meter The rugged OG6 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 2.0 to 200 L/min on 30 cSt oil and 10 to 200 L/min on water like liquids. The standard inlet and outlet are 1½” female threads. For OEM use alternatives, including manifold mountings, are available. The standard models are 316 St St or Aluminium with Viton® ‘O’ ring seals. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 21 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. IDEAL FOR • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas OG6 30cStk oil ‘K’ Factor vs Flow rate 21.8 21.7 Flow L/minute FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Hall, reed switch or Namur sensor • Accuracy 1.0% reading water 0.5% reading oil (30 cSt) • ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 400 Bar

Open the catalog to page 1

OG6 200L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Ordering codes Model OG6 A = Aluminium 10 Bar max H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al) 4 = 400 Bar 5880 PSA (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (50 Bar max) K = Kalrez® Detector Type H = Hall effect R = Reed switch & Resistor N = Namur X = Reed switch (Hazardous area) Pipe Thread P = 11/2” (OG6 std) Connections B = BSP F N = NPT F Sample product codes - Stainless standard Aluminium standard...

Open the catalog to page 2

OG6 Oval Gear Meter 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

OG6 Oval Gear Meter
2Pages