Catalogs >
Titan Enterprises >
Metra-Clear

Metra-Clear
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET Metra-Clear Oval Gear Meter The compact rugged acrylic topped oval gear flowmeter is designed to give high performance with a low cost of ownership. The meters cover flow ranges from 0.01 to 100L/min on 30cSt oil and 0.1 to 100L/min on water like liquids. For OEM use alternatives, including manifold mountings, are available. The standard models have 316 St St aluminium or PEEK bodies with Viton® ‘O’ ring seals. For general meter specification see the appropriate OG data sheet. FEATURES • Rugged construction • High visibility • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch sensor • Accuracy ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Non-metallic option • 10Bar pressure • 60°C maximum temperature • 5 flow ranges IDEAL FOR • Engine test • Critical oil flow • High viscosity fluids • OEM equipment MC3 Metra-Clear 30cStk oil ‘K’ Factor vs Flow rate 460 * When used with our Flow L/minute

Open the catalog to page 1

Metra-Clear Oval Gear Meter Ilian Ordering codes Model MC1 MC2 MC3 MC4 MC5 Body material S = 316 St St *Cap - Acrylic A = Aluminium *Cap - Acrylic P = PEEK™ *Cap - Acrylic Temp rating S = 60°C / 140°F Pressure rating 1 = 10 Bar 150 PSI Seal Material V = Viton® N = Nitrile E = EPDM K = Kalrez® Detector Type H = Hall Effect R = Reed Switch & Resistor X = Reed Switch (Hazardous area) Pipe Thread Q = 1/4” (OG1 & OG2 std) H = 1/2” (OG3 std) T = 3/4” (OG4 std) U = 1” (OG5 std) Connections B = BSP F N = NPT F F = Flanged (specify) e.g. MC3-SS1-VHH-B is a stainless steel meter rated at 60°C, 10...

Open the catalog to page 2

Metra-Clear 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

Metra-Clear
2Pages