catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Melt flow indexer, Materials testing machine, Test set, Brinell hardness tester, Hardness tester
Text version of the page
Drawability
The Modul-r is the most efficient and economical 'Go/No-Go' testingmethod available for determining if a given batch of sheet steel is suitable for a deep-drawing application.After marking the rolling direction of the sheet, three narrow teststrips are blanked, or sheared, at 0°, 45°and 90°to this direction from a 150 mm square sample sheet. All three test strips are produced simultaneously with the punch press. Testing involves simply inserting a steel strip into the test slot and depressing the 'TEST' button for a few seconds while the resonant frequency appears on the display. The operator records the reading on a worksheet and repeats the test for the remaining two strips. Our model IT406 and model IT542 Impact Testers,with available energy capacities of 406J and 542J respectively, feature heavy-duty construction and an interchangeable striker to easily change between Charpy, Izod, and tensile impact testing. The proper accessories allow these machines to operate in accordance with ASTM E23 and other similar international standards, along with a fully enclosed and interlocked model to meet the requirements of CE directives. These machines also feature amicroprocessor-based display for conducting the test, obtaining test results, calibration, connection to a PC, and system configuration. The striker can be replaced so that either Charpy, Izod, or tensileimpact tests can be performed. The system can also be supplied with an instrumentation system that can collect and analyze up to 1 million data points per test so that an extremely detailed graphical representation of the impact curve can be analyzed. For maximum versatility and capability, Tinius Olsenoffers a full range of torsion testing machines from 10,000 in.lb (1,000 Nm) to 300,000 in.lb (30,000 Nm) capacity (larger capacity or longer machines are available upon request). These superior torsion testers not only provide weighing and loading capabilities in both directions of rotation, but also make it possible to determine the ultimate torque of a specimen and provide data on how that specimen behaves under continuous or intermittent torque loading conditions.Our Brinell hardness testers are renowned throughout the world for robustness and reliability. These air-operated machines offer a combination of laboratory accuracy with rugged construction to withstand the most demanding shop requirements. Simplicity and confidence of accurate, uniform application of standard loads, combined with the flexibility of an adjustable mounting head or standard testing frame, means that the Tinius Olsen machines are the Brinell hardness testers of choice. Impact Torsion Strength Hardness
3
The Modul-r is the most efficient and economical 'Go/No-Go' testingmethod available for determining if a given batch of sheet steel is suitable for a deep-drawing application.After marking the rolling direction of the sheet, three narrow teststrips are blanked, or sheared, at 0°, 45°and 90°to this direction from a 150 mm square sample sheet. All three test strips are produced simultaneously with the punch press. Testing involves simply inserting a steel strip into the test slot and depressing the 'TEST' button for a few seconds while the resonant frequency appears on the display. The operator records the reading on a worksheet and repeats the test for the remaining two strips. Our model IT406 and model IT542 Impact Testers,with available energy capacities of 406J and 542J respectively, feature heavy-duty construction and an interchangeable striker to easily change between Charpy, Izod, and tensile impact testing. The proper accessories allow these machines to operate in accordance with ASTM E23 and other similar international standards, along with a fully enclosed and interlocked model to meet the requirements of CE directives. These machines also feature amicroprocessor-based display for conducting the test, obtaining test results, calibration, connection to a PC, and system configuration. The striker can be replaced so that either Charpy, Izod, or tensileimpact tests can be performed. The system can also be supplied with an instrumentation system that can collect and analyze up to 1 million data points per test so that an extremely detailed graphical representation of the impact curve can be analyzed. For maximum versatility and capability, Tinius Olsenoffers a full range of torsion testing machines from 10,000 in.lb (1,000 Nm) to 300,000 in.lb (30,000 Nm) capacity (larger capacity or longer machines are available upon request). These superior torsion testers not only provide weighing and loading capabilities in both directions of rotation, but also make it possible to determine the ultimate torque of a specimen and provide data on how that specimen behaves under continuous or intermittent torque loading conditions.Our Brinell hardness testers are renowned throughout the world for robustness and reliability. These air-operated machines offer a combination of laboratory accuracy with rugged construction to withstand the most demanding shop requirements. Simplicity and confidence of accurate, uniform application of standard loads, combined with the flexibility of an adjustable mounting head or standard testing frame, means that the Tinius Olsen machines are the Brinell hardness testers of choice. Impact Torsion Strength Hardness
3