video corpo cad

Timken Ball Bearings Catalog - 102 / 217 Pages

Housed Units

RCJ, TCJ, LCJ INDUSTRIAL SERIES

» Timken cartridges are used in applications where a minimum

amount of machining is to be done.

► Each unit comes assembled and ready for mounting, with bolts

through the flange.

• Wide inner ring bearings, self-aligning B-types, which compensate

for shaft misalignment.

• RCJ flange cartridge is equipped with G-KRRB (R-Seal) wide

inner ring bearings. The TCJ is equipped with G-KPPB (Tri-Ply

Seal) wide inner ring bearings. The LCJ is equipped with the

G-KLLB (Mechani-Seal) wide inner ring bearings.

• TCJ flange cartridges are identical to RCJ units, except they use the

Tri-Ply seal bearing. Tri-Ply units offer the best protection in dirty

environments.

• Units are factory prelubricated, but a grease fitting is provided for

relubrication if required. Units are supplied with self-locking collars.

• Contact a Timken representative to discuss highly corrosive

applications (food processing, chemical exposure) where

Timken thin dense chrome coated bearings can be used.

• Safety end caps are available for selected sizes.

RCJ, LCJ

TCJ

BEARING DATA

RCJ

Bearing Number

G-KRRB

Dimensions and Load Ratings

Page DM

TCJ

G-KPPB

Page D65

LCJ

G-KLLB

Page D62

Suggested shaft tolerances:

113/i5" -115/i6", nominal to -.013 mm, -.0005";

2" - 315/i6", nominal to -.025 mm, -.0010".

Larger sizes, consult your Timken

representative.

TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJ 13/i6". POPULAR SIZES ARE IN BOLD.

Unit'21 Shaft

Dia.

L J Ai A E N Ei Si D ili Bearing Collar Housing Unit

réf. réf. ref. ±.015" max. réf. ref. ±.005" Number^) Number Number Wt

¡n.

mm mm mm mm mm mm mm mm mm mm new kg

¡n. ¡n. ¡n. ¡n. ¡n. ¡n. ¡n. ¡n. ¡n. m. RCJ (TCJ) (old) lbs.

RCJ 1/2

RCJ 5/8

RCJ "/i6

RCJ 17

G1008KRRB S1008K

76.2 54 9.5 23.6 40.6 10.7 13.9 23.4 52.4 28.1 G1010KRRB S1010K T-40278 0.526

3 2 Vs '3/32 0.92 9 1.59 9 27/64 3ilw 59/64 2 Vl6 1.105 G1011KRRB S1011K (T-16659] 1.16

GE17KRRB SE17K

RCJ 3A

RCJ 20

85.7 63.5 11.1 27.8 46.4 10.7 16.3 26.6 60.3 32.8 G1012KRRB S1012K T-40267 0.726

33/8 2 1/2 7/l6 1.09 4 1.82 8 27/64 ""fa 1 3/64 2 3/8 1.2 92 GE20KRRB SE20K (T-16661] 1.6

RCJ, TCJ %

RCJ, TCJ 'S/ie

RCJ, TCJ 1

RCJ, TCJ 25

G1014KRRB (KPPB3I S1014K

95.2 69.8 12.7 27.9 46.6 11.5 15.9 27 65.1 37.6 G1015KRRB (KPPB3I S1015K T-40262 0.939

33/4 23/4 1/2 1.100 1.834 2%4 5/8 iy16 2 9/ie 1.480 G1100KRRB (KPPB3] S1100K (T-16663] 2.07

GE25KRRB (KPPB3) SE25K

RCJ, TCJ 1 Vie

RCJ, TCJ 1 Vs

RCJ, TCJ 13/16

RCJ, TCJ 30

G1101 KRRB (KPPB3] S1101K

107.9 82.6 13.5 29.9 50.5 11.5 17.5 30.2 76.2 43.9 G1102KRRB (KPPB3] S1102K T-40266 1.302

41/4 31/4 "te 1.178 1.990 2%4 "/l6 1 3/16 3 1.730 G1103KRRB (KPPB3] S1103K (T-16664] 2.87

GE30KRRB (KPPB3) SE30K

RCJ, TCJ 11/4

RCJ, TCJ 15/i6

RCJ, TCJ 13/8

RCJ, TCJ 1 Vie

RCJ, TCJ 35

G1104KRRB (KPPB2] S1104K

117.5 92.1 13.5 31.8 53.5 13.1 19 32.5 88.9 53.6 G1105KRRB (KPPB2] S1105K T-40253 1.787

45/8 3 5/8 "te 1.254 2.106 33/64 3/, 1 9/32 31/2 2.112 G1106KRRB (KPPB2] S1106K (T-16617] 3.94

G1107KRRB (KPPB2) S1107K

GE35KRRB (KPPB2) SE35K

RCJ, TCJ IV2

RCJ, TCJ 19/ie

RCJ, TCJ 40

130.2 101.6 14.3 38.1 59.3 13.1 20.6 34.9 98.4 58.2 G1108KRRB (KPPB3] S1108KT T-40263 2.291

5 Vs 4 9/i6 1.50 0 2.33 4 33/61 13/16 ! 3/8 3 7/8 2.292 G1109KRRB (KPPB3] S1109KT (T-16666] 5.05

GE40KRRB (KPPB3) SE40K

RCJ, TCJ 15/s

RCJ, TCJ 1 «/ie

RCJ, TCJ 13/,

RCJ, TCJ 45

G1110KRRB (KPPB4] S1110K

136.5 104.8 14.3 38.9 59.3 13.1 19.8 34.9 104.8 63.0 G1111 KRRB (KPPB4] S1111K T-40264 2.585

53/8 4 Vs 9/l6 1.53 1 2.33 4 33/61 25/32 1 3/8 41/5 2.480 G1112KRRB (KPPB4] S1112K (T-16667] 5.7

GE45KRRB (KPPB4) SE45K

RCJ, TCJ 17/s

RCJ, TCJ 1 'S/ie

RCJ, TCJ 50

142.9 111.1 14.3 42.9 66.4 17.1 23 38.1 112.7 69.3 G1114KRRB (KPPB3] S1114K T-40265 3.016

55/8 43/8 S/16 1.688 2.615 13/64 29/32 1 1/2 47/i6 2.730 G111SKRRB (KPPB3] S1115K (T-16668] 6.65

GE50KRRB (KPPB3) SE50K

RCJ, TCJ 2

RCJ, TCJ 2 Vs

RCJ, TCJ 23/,6

RCJ, TCJ 55

G1200KRRB (KPPB4] S1200K

161.9 130.2 16.7 46.8 75.1 17.1 27.8 43.7 120.6 75.7 G1202KRRB (KPPB4] S1202K T-40268 3.842

63/8 5 Vs 2,/32 1.84 4 2.95 8 %! 1 3/32 1 23/32 4 3/4 2.9 80 G1203KRRB (KPPB4] S1203K (T-16683] 8.47

GE55KRRB (KPPB4) SE55K

RCJ 21/4

RCJ 23/8

RCJ 2 7/,6

RCJ 60

G1204KRRB S1204K

174.6 142.9 17.5 49.2 81.6 17.1 31.8 46.8 136.5 83.6 G1206KRRB S1206K T-40269 5.048

67/8 5 5/8 "/ie 1.937 3.214 13/64 Vit 1 27/32 5 3/8 3.2 92 G1207KRRB S1207K (T-17648] 11.13

GE60KRRB SE60K

RCJ 2 "/is

RCJ 70

187.3 149.2 19.1 63.5 90.3 16.3 25.4 45.2 152.4 96.3 G1211 KRRB S1211K T-22530 6.885

73/8 5 7/8 3/fl 2.500 3.557 4'/64 1 1 25/32 6 3.7 92 GE70KRRB SE70K (T-22270] 15.18

RCJ 215/ie

RCJ 75

196.8 152.4 22.2 66.7 96.7 19.8 26.2 54.8 161.9 101.1 G1215KRRB S1215K T-21620 8.21

73/4 6 7/8 2.625 3.807 a/32 1 V32 2 5/32 6 3/8 3.9 80 GE75KRRB SE75K (T-21620] 18.1

HI Bearing numberfor RCJ is G-KRRB. TCJ uses G-KPPB.

B Type LCJ uses G-KLLB.

TIMKEN PRODUCTS CATALOG D101 •

Timken Ball Bearings Catalog
  1. P. 1

  2. P. 97

    BALL BEARINGS RSA, LSA INDUSTRIAL SERIES • RSA Series are equipped with G-KRRB wide inner ring ball bearings. • LSA Series are...
  3. P. 98

    Housed Units RSAO, LSAO HEAVY SERIES • RSAO pillow blocks are equipped with GN-KRRB wide inner ring ball bearings. • LSAO pillow...
  4. P. 99

    0, BALL BEARINGS SAL INDUSTRIAL SERIES FIXED & FLOATING TYPES ► Designed for applications where normal to high temperatures are...
  5. P. 100

    Housed Units SAOL HEAVY SERIES FIXED & FLOATING TYPES ► Designed for applications with higher than usual temperatures orwhere one or...
  6. P. 101

    0, BALL BEARINGS DRNR INDUSTRIAL SERIES This rigid double pillow block is designed to provide a sturdy two-bearing mounting for fans and blowers,...
  7. P. 102

  8. P. 103

    0, BALL BEARINGS RCJC INDUSTRIAL SERIES CONCENTRIC COLLAR • The same basic design asthe RCJ Series, except a concentric collar is used...
  9. P. 104

    Housed Units YCJ INDUSTRIAL SETSCREW SERIES • The same basic design as the RCJ Series, except specially designed setscrews are used as the...
  10. P. 105

    0, BALL BEARINGS VCJ STANDARD SERIES • Flange cartridges come assembled and ready for mounting by using four bolts through the flange. •...
  11. P. 106

    Housed Units SCJ STANDARD SERIES • Flange cartridges come assembled and ready for mounting by using four bolts through the flange. •...
  12. P. 107

    BALL BEARINGS RCJO, LCJO HEAVY SERIES • Flange cartridges are similar in design to the standard series. • Ideal for applications...
  13. P. 108

  14. P. 109

  15. P. 110

  16. P. 120

  17. P. 130

  18. P. 140

  19. P. 150

  20. P. 160

  21. P. 170

  22. P. 180

  23. P. 190

  24. P. 200

Text version

All TIMKEN catalogues and technical brochures

  1. UC-SERIES

    24 Pages

    En
  2. BALL BEARINGS

    214 Pages

    En

Archived catalogues

  1. Ball Bearings

    6 Pages

    En
  2. Maintenance Tools

    16 Pages

    En
  3. Ceramic Bearings

    2 Pages

    En