catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Ball screw support bearing, Grease pump, Shaft, Lubricator, Contactless sensor
Text version of the page
products Cylindrical roller thrust bearings featureahardened-steel cage and are guided
byeither the shaft or housing. Thesebearings can be used on either
hardened or ground raceways or on
thrust washers. These high-capacity
bearings are used for heavy thrust
loads within a wide range of operatingspeeds. Typical applications include
material handling equipment, lifting
mechanisms and transmissions. Timken
® Torrington
® Cylindrical Roller Thrust Bearings
Size range: 15mm – 90 mm bore (0.59” – 3.5433”) Type TP cylindrical thrust bearings havetwo flat-hardened and ground steel races with a cage retainer holding one or more controlled-contour rollers in each pocket. If specifications call for two or more rollers per pocket, they are manufactured to different lengths. The longer rollers are placed in alternate positions in adjacent pockets. The overlapping roller paths help prolong bearing life. This robust design permits minor radial displacement of the races during operation and eases installation. Timken
® Torrington
® Cylindrical Thrust Type TP
Size range: 50.8 mm – 609.6 mm bore (2” – 24”) The TPS cylindrical thrust bearing issimilar to the TP style except that the bottom assembly is comprised of two washers with spherically ground con- tacting faces. The TPS bearing is self- adjusting to initial misalignment. It is not, however, suggested for installations where alignment may be continuously changing (dynamic misalignment). Timken
® Torrington
® Aligning Cylindrical Thrust Type TPS
Size range: 50.8 mm – 406.4 mm bore (2” – 16”) 15
® Torrington
® Cylindrical Roller Thrust Bearings
Size range: 15mm – 90 mm bore (0.59” – 3.5433”) Type TP cylindrical thrust bearings havetwo flat-hardened and ground steel races with a cage retainer holding one or more controlled-contour rollers in each pocket. If specifications call for two or more rollers per pocket, they are manufactured to different lengths. The longer rollers are placed in alternate positions in adjacent pockets. The overlapping roller paths help prolong bearing life. This robust design permits minor radial displacement of the races during operation and eases installation. Timken
® Torrington
® Cylindrical Thrust Type TP
Size range: 50.8 mm – 609.6 mm bore (2” – 24”) The TPS cylindrical thrust bearing issimilar to the TP style except that the bottom assembly is comprised of two washers with spherically ground con- tacting faces. The TPS bearing is self- adjusting to initial misalignment. It is not, however, suggested for installations where alignment may be continuously changing (dynamic misalignment). Timken
® Torrington
® Aligning Cylindrical Thrust Type TPS
Size range: 50.8 mm – 406.4 mm bore (2” – 16”) 15