Text version of the page

Lab Supplies

Tools of the trade - Vol 18 - 36188 5-Minute Epoxy

Lens Care/Cleaning

5-Minute Epoxy

Epoxies

A general purpose 2-part epoxy, packaged in an easy-to-use dispenserthat ensures a proper mix ratio every time.

Cables, Electrical Safety & Blackout

ITEM#$£ ¥DESCRIPTION

Screws

G14250$ 7.98£ 5.98 8,38¥ 1,3575-Minute Epoxy, 1 ounce

19" Rack Hardware

Vacuum Grease Vacuum Epoxy Acrylic Anaerobic Adhesive

Tools

A Silicone lubricant for glass stopcocks, joints and glass to rubber connections and otherapplications. Resistant to most chemicals. The lubricant is heat stable and inert.

â– 

The Lubricant Grease has a Higher Temperature range (-40°C to 260°C) thanHydrocarbon Greases.

â– 

Recommended for Vacuums Reaching Between 1x10

-5

and 1x10

-6

torr. The lubricant also finds wide application for the lubrication of water-treating equipment andgeneral laboratory equipment even for non-vacuum applications. It is used for the lubrication of “o” rings on binoculars and telescopes, and is also used to prevent fogging on delicate lenses and mirrors.

ITEM#$£ ¥DESCRIPTION SG10$ 48.00£ 36.00 50,40¥ 8,160Vacuum Grease

Low vapor pressure two part epoxy resin for high vacuum applications

â– 

Seals Leaks in Vacuum Equipment Requiring VacuumDown to 10

-9

torr.

â– 

Forms a High Strength bond with metals, ceramics or glass.

â– 

No solvent involved to evaporate.

â– 

At room temperature it hardens in 1 hour, cures in 24 hours.

â– 

At 60°C it hardens in 30 minutes, cures in 90 minutes.

â– 

Forms a reliable seal for long term use.

ITEM#$£ ¥DESCRIPTION TS10$ 83.00£ 62.25 87,15¥ 14,110Vacuum Epoxy

Properties

LOCTITE® Speedbonder™ 312anaerobic adhesive kit contains a 10ml bottle of adhesive and a 40g aerosol can of primer. This adhesive provides exceptionallystrong bonds between similar and dissimilarmaterials (metal, glass, ceramic, nylon, wood and some plastics) in minutes. Bonding steel to steel, the bond strength will be ~65% after 5 minutes, ~80% after30 minutes and a full cure is typically after24 hours.

â– 

Acrylic adhesive & primer

â– 

Superior bonding of metal, glass,ceramic, nylon & wood

â– 

Fast cure at room temperature - sets inseconds, strong bond in 1-2 minutes

â– 

Easy to use - no measuring or mixing

â– 

Operating temp: -54°C to +150°C Note: This product is not recommendedfor use in pure oxygen and/or oxygen rich systems and it should not be selected as a sealant for chlorine or other strongoxidizing materials.

ITEM#$£ ¥DESCRIPTION LOC312$ 23.90£ 17.92 25,10¥ 4,063Acrylic Anaerobic Adhesive
LOCTITE and Speedbonder are Trademarks of Henkel Loctite

Sales: 973-579-7227

737