| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | Tables & Breadboards | WEB 1 DWG\ | | | | Pump&Go™ Passive Isolation Systems | | | | | | | | | | |
| | | |
| | | Breadboard Supports | | |
| | | i | | |
| | | 20 | | |
| | | | | |
| | | |
| | | |
| | | Optical Tables | | |
| | | |
| | | m S 0| | |
| | | |
| | | |
| | | Table Supports | | |
| | | |
| | [90% Ш z О ! 99% о | | |
| | | -20 | | |
| | | |
| | | -40 | | |
| | | |
| | | |
| | | -60 | | |
| | | |
| | 0.5 | | 10 FREQUENCY (Hz) | | |
| | | |
| | | |
| | | Vertical and Horizontal Transmissibility of Thorlabs Pump & Go™ Passive Vibration Isolators. | | |
| | | Load Capacity (set of four): • Standard: 275-1100kg (600-2425 lb) • Heavy duty: 550-2200kg (1200-4850 lb) Height: 600 and 700mm (24 and 28") Air Pressure Required: 550kPa (80 psi) Maximum Finish: Black Paint | | |
| | | |
| | | |
| | | r | | |
| | | |
| | | Pump & Go™ passive isolators, the most cost effective vibration isolators available, are ideal for removing floor vibrations in the critical 10Hz to 50Hz frequency range. Pump & Go isolators provide simple, effective vibration isolation with excellent horizontal and vertical stability. They inflate with a foot pump and isolate without air consumption. A choice of load capacity is provided to match your application. | | |
| | | table | | |
| | | |
| | | upper plate base plate | | |
| | | |
| | | reinforced rubber air mount | | |
| | | | | | | | | | | | Pump&Go™ Standard Vibration-Isolation Data* | | | | Resonant Frequency | Transmissibility (Isolation Efficiency) | | | | Vertical | Horizontal | Vertical | Horizontal | | | | <5Hz | <4Hz | <6dB at resonance | <9.2dB at resonance | | | | <0.25dB(>75%) @ 10Hz | <0.13dB(>87%) @ 10Hz | | | | | | | | Pump&Go™ Heavy Duty Vibration-Isolation Data* | | | | Resonant Frequency | Transmissibility (Isolation Efficiency) | | | | Vertical | Horizontal | Vertical | Horizontal | | | | <5.5Hz | <4.5Hz | <6.5dB at resonance | <9-0dB at resonance | | | | <0.4dB(>60%) @ 10Hz | <0.25dB(>25%) @ 10Hz | | | | | | | | | | | |
| | | |
| | | |
| | | Schraeder valve steel outer cylinder | | |
| | | |
| | | -013-4" (340mm) | | |
| | | |
| | | |
| | | ^Performance values were measured supporting a 1.25mm x 2.5m x 310mm (4' x 8' x 12.2") table. Heavier tables or loads will have a lower vertical resonant frequency, higher transmissibility at resonance, and lower transmissibility at 10Hz. Standard Pump&Go™ Isolators | | |
| | | Pump & Go™ Passive Vibration Isolation. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | ITEM | | | | | DESCRIPTION | HEIGHT | | | | $ | £ | € | „ | | | | PTP502 | $ 2,150.50 | £ 1,265.00 | € 1.897,50 | „ 354,200 | Pump&Go™ Set of 4 | 24" (600mm) | | | | PTP503 | $ 2,150.50 | £ 1,265.00 | € 1.897,50 | „ 354,200 | Pump&Go™ Set of 4 | 28" (700mm) | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | | | | Heavy Duty Pu | mp&Go™ Is | olators | | | | | | | | ITEM | $ | £ | € | „ | DESCRIPTION | HEIGHT | | | | PTH502 | $ 2,380.00 | £ 1,400.00 | € 2.100,00 | „ 392,000 | Pump&Go™ Heavy-Duty Set of 4 | 24" (600mm) | | | | PTH503 | $ 2,380.00 | £ 1,400.00 | € 2.100,00 | „ 392,000 | Pump&Go™ Heavy-Duty Set of 4 | 28" (700mm) | | | | | | | | | | | | | | |
| | | Please contact your local sales office for a quotation including shipping Sales: 973-579-7227 | | |
| | | THOR <H | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |