Text version of the page

Motion Control

Tools of the trade - Vol 18 - 36188 2 & 3 Channel Benchtop Stepper Motor Controller… Page 2 of 2

Translation StagesMotorized Full Software GUI Control Suite & ActiveX
® Mirror Mounts Controls Included Software Developers Support CD
®

Specifications (Per Channel)

The sophisticated ActiveX apt™ softwareshipped with the stepper unit is also compatible with rack-based controllers as well as the newopto drives. This allows seamless mixing of bothstand alone and rack based systems in a single application and with a single unified software offering. See pages 354-356 for more details on the apt™ software suite.
â–  Drive Connector (Drive Outputs, QEP Inputs, Limit Switch Inputs)
Rotation Stages3 Axis Flexure Stages A developers' kit is shipped with all of our apt™series controllers. This additional software is intended for use by software developers working on large, system integration projects which incorporate apt™ products. The kit contains anextensive selection of useful code samples as well as tutorial information, see page 356.
â–  User Control Connector: Jog Inputs, Enable Interlock, RS232, TriggerIn/Out (TTL) (user output is open collector)
& Accessories â–  Motor Powers: Up to 48V/50W(Peak)
4, 5 & 6-Axis Stages â–  Resolution: •128 Microsteps per Full Step•25,600 Microsteps per Revolution (200 Full Step Motor)
Drive Electronics& Auto-Alignment â–  Motor Speeds: Up to 600 RPM (for 200 Full Step Motor)
Actuators & â–  Encoder Feedback Bandwidth: 500,000 Counts/Sec
Adjusters â–  Compatible Motors • Peak Powers: 5 to 50W• Average Power: 25 W Maximum• Step Angle Range: 20°to 1.8°• Coil Resistance (Nominal): 4 to 15 Ω • Coil Inductance (Nominal): 4 to 15mH• Rated Phase Currents (Nominal): 100mA to 1A
â–  USB Interface with Full PC Control Software Suite
â–  Output Power: 50W per Channel (2 & 3 Channels)• Volts: 85 to 264V AC• MOTOR DRIVE Power: 200W•
123456789101112131415 Fuse: 3A
â–  Input Power: 150W Max.
â–  General
Pin Description Pin Description • Dimensions (W x D x H):
1 Encoder A +ve 9 CW Limit Stwitch 2 Encoder A -ve 10 CCW Limit Switch 3 Encoder B +ve 11 0V User 4 Encoder B -ve 12 Not Used 5 5V User 13 Not Used 6 Not Used 14 Phase B + 7 Phase B - 15 Phase A + 8 Phase A - 240 x 360 x 133mm (9.5 x 14.2 x 5.2 in.)• Weight: 6.7kg (14.75 lbs) See pages 354-356 for more information on the apt™ software included with the BSC Series Controllers.See our full line of motorizedflexure stages starting on page 276.
BSC103MAX342 ITEM#$£ ¥DESCRIPTION BSC102$2,203.20£1,296.00 1.944,00¥362,880Two Channel apt™ Stepper Motor Controller BSC103$2,807.55£1,651.50 2.477,25¥462,420Three Channel apt™ Stepper Motor ControllerSCC101$671.50£395.00 592,50¥110,600Single Channel Stepper Control Card

High Density Rack Based Motion Controllers

A module version of the apt™ stepper controller is also available for use with the new apt™rack system. The module version is functionally identical to the benchtop unit, and provides a more compact implementation for multi-channel applications such as fully automated control of our range of 3, and 6 axis motorized stages.

Starting on Page 352

Sales: 973-579-7227
337