60 Case Shafting Catalog Section Inch/Metric - Thomson - #9

Text version of the page

162 www.danahermotion.com Nominal Shaft Diameter 1 L PD SS CTL Material – Carbon Steel SS 440 C Stainless Steel TU 52100 Tubular SS316 316 Stainless Steel Type CTL Cut to Length RL Random Length RLL Random Length Long SM Special Machined (see page 187) Option PD Predrilled CPPE Chrome Plated Plain Ends (Carbon Steel Only) DC Deep Case (Carbon Steel Only - Random Length) CTL = Cut to length is Thomson 60 Case cut to your specified length. RL = Random length is full bar or long length shafting. It is called random length because we start with a raw bar 4” to 6” longer than the min. usable but guarantee only the min. usable. We mark the ends of what is out of our own tolerance. This is the result of the manufacturing process and tightly controlled roundness specifications. Look for the Brand Logo If you specify Thomson, look for the logo. Do not be fooled when ordering linear shafting. All Thomson 60 Case LinearRace shafting is etched with the Thomson logo as shown in the picture. If the shaft you have does not have the logo, it may not be a true Thomson 60 Case. Thomson 60 Case is etched approximately every 18 to 22 inches. Class Description L For use with XA, Open and Adjustable Ball Bushing bearings and Pillow Blocks as well as Super Ball Bushing bearings and Super Smart Ball Bushing bearings S For use with A type ball bushings N For use with needle roller bearings D For use with Thomson Die Set Ball Bushing bearings XL For use with XR bearing (Carbon Steel) G Ball Groove Shafting for use with Thomson Super Ball bushing Inch - 60 Case Shafting Hardened and Ground 60 Case Precision LinearRace Shafting Part Number Description