catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Rectangular connector, Electrical cabinet, Connector, Identification label, Cable trunking
Text version of the page
Heavy Industrial/Marine
® portable power centers provide power to temporary, mobile orpermanent applications that may require utilizing transformers, branch circuit or outlet breakers, multiple voltage outputs and even different power outlet types in a single enclosure. The resulting package powers welding machines, compressors, heaters, lighting, blowers, thermal containers or any other distributed power need.Panels can be completely customized to various output, input, protection,construction and cabling requirements, including interlocked switched or standard outlets in any polarization. For instance, 480 volt 3-phaseindustrial power can be supplied along with a 60Hz standard 125 voltoutput in the same case; or with convenience outlets from another Russellstoll line for electric hand tools in the full range of amperagesavailable. Even in the same amperage rating, plugs are non-interchangeable due to single rating polarizations. It’s a flexible, economical system that can eliminate 50% or more of temporary wiring requirements.
©2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com
Russellstoll® Interconnection Systems - 19554 MaxGard
®Interconnection Systems – Custom Products
30-400/600 Amp Plugs, Connectors, Receptacles, Inlets and Interlocked ReceptaclesPortable Power Distribution Centers
MaxGard® portable power centers provide power to temporary, mobile orpermanent applications that may require utilizing transformers, branch circuit or outlet breakers, multiple voltage outputs and even different power outlet types in a single enclosure. The resulting package powers welding machines, compressors, heaters, lighting, blowers, thermal containers or any other distributed power need.Panels can be completely customized to various output, input, protection,construction and cabling requirements, including interlocked switched or standard outlets in any polarization. For instance, 480 volt 3-phaseindustrial power can be supplied along with a 60Hz standard 125 voltoutput in the same case; or with convenience outlets from another Russellstoll line for electric hand tools in the full range of amperagesavailable. Even in the same amperage rating, plugs are non-interchangeable due to single rating polarizations. It’s a flexible, economical system that can eliminate 50% or more of temporary wiring requirements.
Safety
• All MaxGard receptacles in power centers are gated dead-front types,either interlocked with a circuit breaker, separate fused switch or discrete main breaker.• No plug can be inserted or removed from interlocked receptacles unlessthe circuit breaker or switch is in the off position.• Interlocks cannot be turned ONuntil a plug is fully inserted.• All circuit breakers trip free of interlock handles.H
Russellstoll ®Durability
• Power centers are protected from rough handling and severe weather atthe dock, construction site, or other installations by a rugged steel frame and enclosure.• Final design and finishes are to customer spec.Performance
• MaxGard Portable power centers are available with power ratings from 30to 400 amperes at 120 to 600 volts AC.• Combinations are available to meet many job conditions. • All power centers can be supplied with provisions for male inlet,receptacle or direct cable feeds.• “Customization is Standard.”©2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com