| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | C KR6525A (With one long nut Blockj~^) | | |
| | | KR6525 □ Standard Specifications | | |
| | | |
| | | |
| | | Q KR6525B (With two long nut Blocks^) | | |
| | | |
| | | Li | | |
| | | |
| | | J8 | | |
| | | 100 | | LM rail length | | |
| | | |
| | | |
| | | |
| | | 29 | | 2 x n-11 drill through 11 017.5 counterbore x 10.8 deep | | |
| | | 14.4 | | 145 | | |
| | | |
| | | |
| | | 110 | | |
| | | |
| | | |
| | | 70 | | |
| | | 4-M10 x 20 deep -1- | | |
| | | |
| | | |
| | | 0 jj ___Q N. | | |
| | | 52 | | |
| | | |
| | | o | | |
| | | lo Q | | |
| | | |
| | | |
| | | 4 | | |
| | | |
| | | 4-M3 x | | 6 deep | | |
| | | Ji_ VBall screw side 200_„ | | |
| | | |
| | | |
| | | x n1-M2.6 x 4 deep | | |
| | | |
| | | |
| | | JUL | | |
| | | H | | (n1-1)x200 | | |
| | | |
| | | |
| | | |
| | | 30, | | 35 | | 35 | | 145MIN | | |
| | | |
| | | (Distance of two nut blocks In a double block) | | |
| | | |
| | | 3.5, | | 20 | | |
| | | |
| | | |
| | | |
| | | CO I o Q | | |
| | | A | | | o to Q | | |
| | | |
| | | |
| | | -rtn-4 | | |
| | | |
| | | |
| | | o co | | |
| | | B | | |
| | | |
| | | 150 | | |
| | | |
| | | |
| | | (n-1)x150 | | |
| | | G | | | IG1 | | |
| | | |
| | | |
| | | |
| | | Nipple orientation When one nut block is used | | |
| | | 128 | | |
| | | |
| | | 87 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | When two nut blocks are used | | | | | | | z | | | | z | | U=Li | Z | | | | | | | | | | | | | |
| | | 18 | | |
| | | |
| | | io | | |
| | | |
| | | m to | | |
| | | co co | | |
| | | |
| | | |
| | | |,30.|. 70 ,1 130 | | |
| | | cni lo | | |
| | | |
| | | |
| | | |
| | | View A | | Section B - B | | |
| | | |
| | | | | | | | | | | | | | | | | | LM Rail Length (mm) | Full Length L1 (mm) | Possible Stroke Range (mm) | H (mm) | G (mm) | n | m | Unit's Total Weight (kg) | | | | Type A | Type B | Type A | Type B | | | | 980 | 1098 | 810 | 665 | 90 | 40 | 7 | 5 | 31.6 | 34.6 | | | | 1180 | 1298 | 1010 | 865 | 90 | 65 | 8 | 6 | 67 | 40 | | | | 1380 | 1498 | 1210 | 1065 | 90 | 90 | 9 | 7 | 42.4 | 45.4 | | | | 1680 | 1798 | 1510 | 1365 | 40 | 90 | 11 | 9 | 50.5 | 53.5 | | | | | | | | | | | | | | | | | |
| | | |
| | | The possible stroke range of KR6525B shows a value applicable when the product is used with two nut blocks in a double block. | | |
| | | |
| | | Interpretation of Model Number^^^^^^^^^^^^^^^^^^l KR65 25 A +1680L P 0 - 0 0 0 0 | | |
| | | |
| | | 1| Model number ¡2 Ball screw's lead (25 mm) |3| Type of nut block^^^|4l LM rail length J5| Accuracy grade k6| Presence/absence of motor pi Presence/absence of cover J3| Presence/absence of sensor 19 Type of housing A (see page 53) 10 Presence/absence of intermediate housing (see page 55)^^^^^|1_1 Control No. | | |
| | | |
| | | 43 TrfrflK | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |