See other catalogues for
THK
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | C KR5520A (With one long nut Blockj~^) | | |
| | | KR5520 □ Standard Specifications | | |
| | | |
| | | |
| | | Q KR5520B (With two long nut Blocks^) | | |
| | | |
| | | Li | | |
| | | |
| | | 44 | | |
| | | 94 | | |
| | | LM rail length | | |
| | | |
| | | |
| | | |
| | | 128 | | 2 x n-9 drill through Ji, 014 counterbore x 8.6 deep | | |
| | | |
| | | 95.2 | | |
| | | |
| | | 50 | | |
| | | 4-M8 x 15 deep | | |
| | | |
| | | |
| | | CM Q | | |
| | | |
| | | \ y | | |
| | | |
| | | \ Ball screw side , 4-M3 x 6 deep 200_ | | |
| | | 8 | | |
| | | |
| | | \2 x ni-M2.6 x 4 deep | | |
| | | |
| | | |
| | | —_I | | |
| | | (ni-1)x200 | | |
| | | |
| | | |
| | | 128MIN | | |
| | | ¿2^ 45 ,,,27 f | | |
| | | *\ (Distance of two nut blocks In a double block) | | |
| | | |
| | | 20 | | |
| | | |
| | | |
| | | |
| | | CO I o m Q | | |
| | | A | | |
| | | |
| | | • q _i_ | | |
| | | |
| | | |
| | | CNI | | |
| | | 150 | | |
| | | |
| | | B | | |
| | | |
| | | |
| | | j, (G) I | | |
| | | G | | |
| | | (n-1)x150 | | |
| | | |
| | | |
| | | |
| | | Nipple orientation When one nut block is used | | |
| | | 99 | | |
| | | |
| | | 4-M5 x 10 deep | | 65 12 n | | |
| | | |
| | | |
| | | si | | |
| | | |
| | | IHf ~__ 4 h I HtlJjT^ »o IB! | | |
| | | |
| | | CM r-- | | |
| | | |
| | | m m | | |
| | | ol -*| | | |
| | | |
| | | 2 | | |
| | | |
| | | When two nut blocks are used | | |
| | | |
| | | |
| | | |
| | | mm | | |
| | | ■25.l, 50.1 100 | | |
| | | |
| | | |
| | | Section B - B | | |
| | | View A | | |
| | | |
| | | | | | | | | | | | | | | | | | LM Rail Length (mm) | Full Length L1 (mm) | Possible Stroke Range (mm) | H (mm) | G (mm) | n | m | Unit's Total Weight (kg) | | | | Type A | Type B | Type A | Type B | | | | 980 | 1089 | 826 | 698 | 90 | 40 | 7 | 5 | 19.9 | 21.6 | | | | 1080 | 1189 | 926 | 798 | 40 | 15 | 8 | 6 | 21.7 | 23.4 | | | | 1180 | 1289 | 1026 | 898 | 90 | 65 | 8 | 6 | 23.4 | 25.1 | | | | 1280 | 1389 | 1126 | 998 | 40 | 40 | 9 | 7 | 25.1 | 26.8 | | | | 1380 | 1489 | 1226 | 1098 | 90 | 15 | 10 | 7 | 26.9 | 28.6 | | | | | | | | | | | | | | | | | |
| | | |
| | | The possible stroke range of KR5520B shows a value applicable when the product is used with two nut blocks in a double block. | | |
| | | |
| | | Interpretation of Model Number^^^^^^^^^^^^^^^^1^H KR55 20 A +1380L P 0 - 0 0 0 0 □"WS 3 Sii @Ì8ÌÌ9S | | |
| | | |
| | | l| Model number |2| Ball screw's lead (20 mm) |3| Type of nut block^^Hjl LM rail length j5| Accuracy grade k6| Presence/absence of motor |7| Presence/absence of cover J3| Presence/absence of sensor |9| Type of housing A (see page 53) 10 Presence/absence of intermediate housing (see page 55) Rj Control No. | | |
| | | |
| | | 41 TnMlK | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |