ThermoProbe Instruments - ThermoProbe - #1

/ 5


catalogue search
ThermoProbe Instruments - ThermoProbe
P. 01
ThermoProbe Instruments - ThermoProbe
P. 02
ThermoProbe Instruments - ThermoProbe
P. 03
ThermoProbe Instruments - ThermoProbe
P. 04
ThermoProbe Instruments - ThermoProbe
P. 05
Pages:
ThermoProbe Instruments - ThermoProbe


See other catalogues for ThermoProbe
You may also be interested in

Thermometer, Handheld thermometer, Digital thermometer


Text version of the page
ThermoProbe mc
SPECIFICATIONS
Maximum Dimensions:
9.05x 7.20x 1.76 in. 23 x 18.3 x 4.5 cm.
Total Weight-
3 lbs with 75 ft of cable 1.4 kg with 23m of cable
Approved Battery Type:
9 volt Alkaline, Duracell MN1604 Rayovac A1604 Eveready 522
Battery Life:
Approximately 40 hours
Case Materials:
Anodized Aluminum
Limited Warranty:
90 days on Probe Assembly 1 year on other components
Probe:
Stainless Steel probe with static dissipating non-stick cable jacket, 0.020" thick
Standard lengths 50715m 75723m 110734m
Temperature Range:
-60 to 200 °F -55 to 150 °C
Accuracy:
±0.3 °F 32 to 200 °F ±0.2 °C, 0 to 100 °C
Options:
Extra Weight Probe Asphalt Weight Probe Extra Length Sensor Railcar Sensor Custom
TP5
The TP-5 is a basic petrochemical gauging thermometer designed to be rugged, simple and compact yet remain lightweight. The case is constructed of extruded aluminum with an integrated probe holder. An aluminum plate attached below the case retains the probe cable. To ensure reliability in severe conditions, cover plates are gasketed and an unbreakable waterproof switch is pressure sealed at the opening. The unit is powered by a common 9V transistor battery easily accessible and removable, yet securely fixed. A single rubber encapsulated rocker switch provides on/off operation and a photocell controls the backlight for night use. Calibration can be performed without opening the case by removing two access screws. Probe Assembly termination at the circuit board is performed with a lever type terminal for quick replacement. Fahrenheit or Celsius scale is jumper selectable for versatility. LCD segments can be self tested from the circuit board to insure readout integrity. All electronic components except the probe assembly are mounted to a single circuit board eliminating wires and connectors. The instrument has been tested to be Intrinsically Safe to UL 913.
TYPICAL APPLICATIONS
Custody Transfers, Inventory, Tank, Pipeline, Barge, Ship, Railcar Tank Truck. (Recommended Operation: API 7, Intl. Safety Guide For Oil Tankers and Terminals.)
Certifications
Warning:
This device must be ^^"^^ bonded (grounded) before and during introduction into
the tank and remain bonded until complete withdrawal from the tank.
Intrinsically Safe Thermometer
Class I, Div. 1, Groups CD
Other Applications:
Proving Systems (API 4) Metering Systems (API 5) Metering Systems (API 6)
Listed 29GO
Materials:
All petrochemicals, caustic, acid,
alkalies, powders. Molasses, syrups,
distilled spirits.
ThermoProbe, Inc. 613 E. Court St. Jackson, MS 39201 USA www.thermoprobe.net
Tel: +1 601.939.1831 Fax: +1 601.355.1831
© 2004 ThermoProbe, Inc. - Jackson, MS USA. All Rights Reserved.
05/2004

pageCatalog pdf di En 2012-02-07-14