Catalogue - ThermoProbe Instruments - ThermoProbe - (Version JPG)

See other catalogues for ThermoProbe

Handheld thermometer, Thermometer, Digital thermometer

Text version of the page

Thermo Probe

Inc.

SPECIFICATIONS

Maximum Dimensions: 6.6x4.5x4.2 in.

16.7x 11.4 x 10.7 cm

TP8


	Total Weight-	3.7 lbs with 75 ft. of cable
		1.7 kg with 23m of cable
	Approved Battery Type:	9 volt Alkaline,
		Duracell MN1604
		Rayovac A1604
		Eveready 522
	Battery Life:	Approximately 50 hours
	Case Materials:	6063 - T6 Aluminum
	Limited Warranty:	90 days on Probe Assembly
		1 year on other components

Probe:

Class A Platinum RTD in Stainless Steel Probe with static dissipating cable jacket and Aramid Fiber reinforcing for cut and smash resistance. Cable insulation are flourocarbon polymers such as FEP, PFA, or similar materials. Standard lengths 50'/15m 75'/23m 110'/34m Marked in 5 foot/1.5m increments

The TP-8 has been designed to be simple yet very versatile, with circuit and sensor components that are highly accurate and reliable over an extended temperature range. The instrument is compact, with cable storage, probe holders and handles integrated into the case. Depending on the service which the user needs, the case will accommodate both our standard probe assembly or asphalt probe assembly. Models intended for asphalt and molten sulphur applications are designated with the part number suffix "AW". Other items include the coil cord grounding assembly, carry strap and user instruction sheet. To endure the environment and be intrinsically safe, the TP-8 is manufactured of materials which are both immune to petrochemicals and are non-sparking. The enclosure is made of extruded aluminum with a nominal thickness of 0.1"/2.5mm. As with all Thermoprobe instruments, the probe assembly is constructed with a very flexible, static-dissipating, non-stick cable and stainless steel sensor components. To ensure longevity of the user interface, all text is engraved, the window is scratch resistant and the switch is O-Ring sealed.

Operational Attributes

Easily replaceable 9V Battery, provides an average of 50 hours operation. Circuit logic automatically indicates low battery condition, shows readout integrity before each operation, automatically shuts off after two minutes and displays error codes for failure determination. The low power backlight for night operation is photo sensor controlled for convenience and battery conservation. Celsius or Fahrenheit units with C/F indication can be easily chosen by an internal selector without recalibration.

Certifications:

Temperature: Range*-14 to 370 °F,

-10 to 188 °C

*Lower Range Available For Cold Climates

Resolution 0.1 Degrees Calibrated Accuracy:

±0.2°F 14 to 200°F ±0.5°F > 200°F ±0.1°C 10 to 100°C

±0.3°C > 100°C

Long term drift not to exceed

0.05%/year

Meets API requirements.

Options:

Custom cable lengths available. Custom cable increment markings.

Heavy probe weights available.

TYPICAL APPLICATIONS

Custody Transfers, Inventory, Tank, Pipeline, Barge, Ship, Railcar Tank Truck. (Recommended Operation: API 7, Intl. Safety Guide For Oil Tankers and Terminals.)

Other Applications:

Proving Systems (API 4) Metering Systems (API 5)

Metering Systems (API 6)


Listed	Intrinsically Safe Thermometer Class I, Div. 1 Groups ABCD North America ATEX II 2G EEx ia IIB T3/T4/T6 Europe	Warning: This device must be ^^-^^ bonded (grounded) before and during introduction into the tank and remain bonded until complete withdrawal from tihe tank.
29GO ATEX TI IS (japan)	ATEX II 2G EEx ia IIC T3/T4/T6 Europe TIIS Ex ia IIB T4 Japan
ThermoProbe, Inc.	Tel: +1 601.939.1831
613 E. Court St.	Fax: +1 601.355.1831

Materials:

All petrochemicals, caustic, acid,

alkalies, powders. Molasses, syrups,

distilled spirits.

Jackson, MS 39201 USA www.thermoprobe.net

05/2004

ThermoProbe Instruments - ThermoProbe - #3

Handheld thermometer, Thermometer, Digital thermometer