Catalogue - ThermoProbe Instruments - ThermoProbe - (Version JPG)

Untitled

ThermoProbe me

TP7

SPECIFICATIONS

Maximum Dimensions: 13.5x 7.25x4.5 in.

34.3 x 18.4 x 11.4 cm


	Total Weight:	3 lbs with 75 ft. of cable 1.4 kg with 23m of cable
	Approved Battery Type:	9 volt Alkaline, Duracell MN1604 Rayovac A1604 Eveready 522
	Battery Life:	Approximately 50 hours
	Case Materials:	Polypropylene Blend, Stainless Steel and Aluminum.
	Limited Warranty:	90 days on Probe Assembly 1 year on other components
	Probe:	Class APlatinum RTD in Stainless Steel Probe with static dissipating cable jacket and Aramid Fiber rein-forcing for cut and smash resistance. Cable insulation are flourocarbon polymers such as FEP, PFA, or similar materials. Standard lengths 50'/15m 75'/23m 110'/34m Marked in 5 foot/ 1.5m increments
	Temperature:	Range-14 to 370* °F, -10 to 188 °C Lower Range Available For Cold Climates Resolution 0.1 Degrees Calibrated Accuracy: ±0.2°F 14 to 200°F ±0.5°F > 200°F ±0.1°C 10 to 100°C* ±0.3°C > 100°C Long term drift not to exceed 0.05%/year Meets API requirements.
	Options:	Custom cable lengths available. Custom cable increment markings. Heavy probe weights available.

The TP-7 has been developed for ease of use with its reel-case design. In addition to the case, the TP-7 is designed to provide very high reliability, less maintenance, an extended temperature range, and high accuracy without a higher price. This has been achieved by utilizing a platinum RTD temperature sensor, using low power programmable electronics, improving the packaging and integrating field proven components. Other hardware items include the stretch cord grounding assembly and reel locking mechanism.

To endure the environment, the TP-7 is manufactured of materials which are both immune to petrochemicals and are non-sparking. The enclosure is made of high impact plastic which dissipates static electricity and has proven to be tolerant to most petrochemicals, caustics or acids. As with all ThermoProbe instruments, the probe assembly is constructed with a very flexible static-dissipating, non-stick cable and stainless steel sensor components. To ensure longevity of the user interface the faceplate is fabricated of engraved aluminum plate, a scratch resistant polycarbonate window and an O-Ring sealed switch.

Operational Attributes

Easily replaceable 9V Battery, provides an average of 50 hours operation. If probe assembly replacement is necessary, the terminals allow simple connection of the wires. Circuit logic automatically indicates low battery condition, shows readout integrity before each operation, automatically shuts off after two minutes and displays error codes for failure determination. The low power backlight for night operation is photo sensor controlled for convenience and battery conservation. Celsius or Fahrenheit units with C/F indication can be easily chosen by an internal selector without recalibration.

Certifications:

TYPICAL APPLICATIONS

Custody Transfers, Inventory, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck. (Recommended Operation: API 7, Intl. Safety Guide For Oil Tankers and Terminals.)


	Other Applications:	Proving Systems (API 4)
		Metering Systems (API 5)
		Metering Systems (API 6)
	Materials:	All petrochemicals, caustic, acid,
		alkalies, powders. Molasses, syrups,
		distilled spirits.

29GO

ATEX TIIShapan) (£

Intrinsically Safe Thermometer

Class I, Div. 1 Groups ABCD North America ATEX II 2G EEx ia IIB T3/T4/T6 Europe ATEX II 2G EEx ia IIC T3/T4/T6 Europe TIIS Ex ia IIB T4 Japan

arning:

his device must be

bonded (grounded) before and during introduction into tihe tank and remain bonded until complete withdrawal from tihe tank.

ThermoProbe, Inc. 613 E. Court St. Jackson, MS 39201 USA www.thermoprobe.net

Tel: +1 601.939.1831 Fax: +1 601.355.1831

05/2004

ThermoProbe Instruments - ThermoProbe - #2

Digital thermometer, Thermometer, Handheld thermometer