TT + DTTST + DSTHT

The following sensors are available for external temperature control applications (ETC-System) with circulators and cryostats. Description Order-No. Sensor

TT

for Phoenix II-units Ø 3 mm, cable length 3 m, up to 600°C Pt100 sensor in closed protection tube made from stainless steel 18/8, 150 mm long, 333-0429Sensor

â–²â–²â–²

27 Level Control
â–²â–²â–² All circulators and cryostats equipped with a combined pressure and suction pump can be used for the temperature control of external open baths. Tubing mounts with integrated level control are fitted for this purpose to make sure that the external bath will not overflow.

DTT

for DC50-units Ø 3 mm, cable length 3 m, up to 600°C Pt100 sensor in closed protection tube made from stainless steel 18/8, 150 mm long, 333-0613Sensor
150 100

ST

for Phoenix II-units as Sensor TT, 27 mm long, Ø 3 mm, with thread M 10 x 1, cable length 3 m, up to 600°C 333-0428Sensor

DST

for DC50-units as Sensor DTT, 27 mm long, Ø 3 mm, with thread M 10 x 1, cable length 3 m, up to 600°C 333-0612Sensor

HT

for Phoenix II-units 333-0423T-Piece for the sensor as Sensor TT, only to be used with the T-piece 001-1766, cable length 3 m, up to 600°C

HT

to be mounted into HAAKE metal tubing connections 001-1766Replenishing Device Description Order-No. Description Order-No.
Pt100-Sensor / Tubing Connection / Replenishing Device This device enables the user to transfer evaporated water into a bath circulator automatically. The water loss will be compensated in small amounts to avoid temperature shocks and drifts. The device comprises a controller and a float switch. The float switch has to be mounted into the bath cover of the circulator. Automatic replenishing device AN2for 230 V/50..60 Hz/60 VA Tubing mount for the level control in the external bath with screw clamp: 333-0752 Holder for AN2 in bath bridgeH62 and H73 333-0764 333-0762 333-0765 Holder for AN2 in bath cover B5 Holder for AN2 in bath cover B12,K35, K50, C30P, C35P, C50P Holder for AN2 in bath cover B3, B7, K10, K15, K20, C25P 333-0757 333-0759 Holder for AN2 in bath cover K40, K41, C40P, C41P 333-0587 Description Order-No. Tubing mount built into bath cover for level control in the circulator bath when temperature controlling external open vessels. For units with bath: B7, C25P 333-0609 B5 333-0610 B12 333-0603 C30P, C35P, C50P 333-0591 C40P, C41P 333-0608 33