Thermo Scientific - Circulators, Cryostats, Coolers - Thermo Scientific - Process Systems

Catalogue Thermo Scientific - Circulators, Cryostats, Coolers

www.thermo.com

Page

/ 36

Thermo Scientific - Process Systems - 160331

/ 36

See other catalogues for Thermo Scientific - Process Systems

Text version of the page

If)

CM QÛ

SÉ

CO QÛ

i—

CO GO

The SWB25 features a high safety level for constant operation in addition to very accurate temperature control (PID control). Shaking frequency and temperature are adjusted via a keypad and digital display. The heater and control sensor are located underneath the bath, thus guaranteeing easy cleaning.

The fluid level can vary from 50 mm

to 180 mm to accommodate sample

vessels of differing heights.

A second shaking carriage (optional)

can be inter-changed quickly and

easily.

The transparent plastic gable-shaped bath cover (optional) prevents water spillage caused by turbulence. It is recommended for temperatures above 70°C.

op Heating up time

100

SWB25 with swivelling gabled cover One Shaking carriage plate without clamps

Optional accessories Order-No.

Tap water cooling coil 000-8581

Bath liquid: approx. 18 l Water _I_

Swivelling roof-shaped cover

(transp.) 333-0642

Basic rack

for each 2 of the following inserts 333-0259

120 min

Inserts for tubes into basic rack

for 86 of 10 mm 0

333-0130

for 46 of 16 mm 0

333-0131

for 23 of 25 mm 0

333-0132


Technical specification acc. to DIN 12876		SWB25
Working temperature range	°C	22..90
with tap water cooling	°C	20..90
Temperature accuracy	+/- K	0.2
Heater capacity 230V/115V	kW	1.5/1.5
Type of control		PID
Overtemperature protection		adjustable
Bath opening: WxLxD	cm	50 x 30 x 20
Bath volume	l	8..26
Shaking amplitude	mm	15
Shaking frequency (cont. adj.)	min^-1	20..200
Overall dimensions: WxLxH	cm	65 x 34 x 26
Net weight	kg	18
Total wattage 230V/115V	VA	1600/1600
Order-No. for 230V/50..60Hz		375-0001
for 115V/60Hz		375-0002

without holes

333-0151

Plastic clip for diameter reduction in the inserts

16 to 3..10 mm, 50 St

333-0134

25 to 6..17 mm, 25 St

333-0135

Clamps to fix beakers or flasks onto the shaking carriage plate or the basic rack


flask-	glas	no. per
cont.	0	carriage
(ml)	(mm)	plate
25	42	40	000-8732
50	51	32	000-1980
100	64	18	000-1982
250	85	12	000-1990
500	105	8	000-1994
1000	131	5	000-1995
Spare shaking carriage plate			000-8384