Thermo Scientific - Circulators, Cryostats, Coolers - Thermo Scientific - Process Systems

Catalogue Thermo Scientific - Circulators, Cryostats, Coolers

www.thermo.com

Page

/ 36

Thermo Scientific - Process Systems - 131428, 2298, 160331, 6098, 68084, 68350

/ 36

See other catalogues for Thermo Scientific - Process Systems

Text version of the page



	Optional accessories	Order-No.
	Lifting platforms for W13, W15 and V15	333-0583
	for W19, W26, V26	333-0582
	for W46	333-0584
	for W45	333-0581
	Reservoir drain	333-0499
	Set for external circulation to upgrade the baths for DC30-Combinations 333-0586
	for DL30-Combinations	333-0625

The temperature control unit is attached to the bath vessel by means of a bath bridge. The bridge is equipped with openings designed for the subsequent attachment of an immersion cooler, cooling coil and circulation set for temperature controlling external systems. The units used with the DL30 have an especially large filling range. This enables the frequent exchange of objects with a large volume without triggering level alarms.

The integrated TRS (Turbulence Reduction System) avoids excessive turbulence in the bath via a reduction of the flow rate. Full capacity is available if required.

The units V15/B and V26/B are fitted with a industrial compressor cooling unit, i.e. are independent of tap water and are therefore environmentally friendly.

(G (G

(G Qû

</3

co co

plastic snappers to reduce the hole 0 in the inserts from

16 to 3..10 mm, 50 pieces

333-0134

25 to 6..17 mm, 25 pieces

333-0135

Tap water cooling coil

for DC30-Combinations

333-0589

Tap water cooling coil

for DL30-Combinations

Basic rack without inserts (fits 1 x into W13, W15, V15; 2 x in W19, W26, W45; 4 x in W46)

333-0595

Instead of water cooling, an

immersion cooler EK20 or EK30

can be used (see page 26/27)

Bath cover made from stainless steel

(fits 1 x onto W13, W15, V15;

2 x onto W19, W26, V26;

4 x onto W46) 333-0225

Bath cover made from stainless steel

(fits 2 x onto W45) 333-0648

333-0129

inserts

for tubes into basic rack

Comes with

Bath bridge to fix the circulator onto the bath and a directable industrial nozzle

for 86 of 10 mm 0

333-0130

for 46 of 16 mm 0

333-0131

for 23 of 25 mm 0

333-0132

without holes

333-0151

Pumpset (optional)

Lifting platform (optional)


Technical specifications acc. to DIN 12876		DL30-V15/B	DL30-V26/B	DC30-W13/B	DL30-W15/B
Working temperature range with tap water cooling with other cooling	°C °C °C	-5..150	-10..150	25..200 20..200 -50..200	25..200 20..200 -50..200
Temperature accuracy	+/- K	0.01	0.01	0.01	0.01
Heater capacity 230V/115V	kW	2.0/1.2	2.0/1.2	2.0/1.2	2.0/1.2
Cooling capacity at 20°C	W	200	250	-	-
Pump: Pressure/Flow rate max.	mbar/l /min	300/17	300/17	300/17	300/17
Bath opening: WxLxD	cm	30 x 17.5 x 20	30 x 35 x 20	30 x 17.5 x 15	30 x 17.5x 20
Bath volume	l	8..15	14..26	7..12	8..15
Overall dimensions: WxLxH	cm	36 x 59 x 40	36 x 75 x 40	34 x 36 x 35	34 x 36 x 40
Net weight	kg	27	32	8.8	9
Total wattage 230V/115V	VA	2400/1500	2500/1700	2050/1250	2050/1250
Order-No. for 230V/50..60Hz for 115V/60Hz		427-3531 427-3532	427-3561 427-3562	426-3141 426-3142	427-3161 427-3162
ExtraPlus-Rating (see page 35)		+++	+++	+++	+++