Ramsey Microwave Point Level Detector - Thermo Scientific - Process Systems - #2

Text version of the page

Specifications Thermo Scientific Ramsey Microwave Point Level Detector Input Voltage 115 VAC nominal, 100-130 VAC acceptable, 50-60 Hz 240 VAC nominal, 200-270 VAC acceptable, 50-60 Hz AC supplies lined fuse: 100 mA, 250 VAC Both MRS & MRR units include terminals for 24 VDC supply power Power Consumption MRA <5 VA Remote Amplifier Power Density Rated from sender (MRS) to receiver (MRR) at approximately 20ìW/cm2 ; No interconnection wiring between sender and receiver; Complies with FCC Title Rules Part 15; Caution sign posting not required Transmitted Signal Frequency 10.525 GHz, + 25MHz Average Power Density 20 ìW/cm2 typical; Linearly Polarized Field; Beam angle (3 dB) approximately 30 degrees (conservative) Range Maximum Range—Ideal Conditions 150 m (492 ft) Minimum Range—Ideal Conditions 10 cm (4 in); Minimum ranges are dependent on application conductivity Mounting 1. DN80 (3 in - NPT) male thread or four 6 mm (0.250 in) blind bolt holes in flange A. DN80 (3 in - NPT) weldments supplied for standard integral mounting B. Flange is used for remote mount in high vibration applications – isolation shock mounts are available 2. DN100 (4 in - NPT) weldments with PTFE (Teflon) and UHMW windows 3. Ceramic window assemblies 4. Firebrick window assemblies available on custom basis 5. DN50 (2 in - NPT) sight glass window 6. Waveguides – custom assemblies available Adjustments MRA Test switch – momentary push-button. Single turn coarse and single turn fine adjustment potentiometers for set point. Relay time delays adjustable from 100 ms to 30 seconds via two independent on/signal make and off/signal break potentiometers with automatic reset. Fail-Safe Switch Selectable Presence or absence of material High Level Fail-Safe Position Relay is activated when material is present Low Level Fail-Safe Position Relay is activated when no material is present Temperature MRS & MRR: -30°C to +65°C (-20°F to +150°F). For higher temperature applications, remote mounting with windows is necessary. Custom waveguide assemblies can also be provided. UHMW Window +80°C (+176°F) Ceramic Window +800°C (+1,470°F) Firebrick Assemblies Consult factory for manufacturer’s specifications. Cabling Entry(ies) MRA, MRS, MRR: 9.525 mm (0.375 in) NPT Relay Contact Output MRA: SPDT - 10 amps @ 250 VAC resistive, 10 amps @ 125 VAC resistive Enclosure NEMA-4X; Meets Class 2, Div. 1, Groups E, F & G (DIP-Dust Ignition Proof) classification; FM approval pending Windows UHMW (ultra-high molecular weight) polyethylene standard, PTFE (Teflon) available Shipping Weights 11.8 kg (26 lb) per pair Australia +61 (0) 8 8208 8200 +61 (0) 8 8234 3772 fax Canada +1 (905) 888-8808 +1 (905) 888-8828 fax Chile +56 (0) 2 378 8050 +56 (0) 2 370 1082 fax China +86 (0) 21 6865 4588 +86 (0) 21 6445 7830 fax Germany +49 (0) 208-824930 +49 (0) 208-852310 fax India +91 (20) 6626 7000 +91 (20) 6626 7001 fax Italy +39 02-959514-1 +39 02-953200-15 fax Netherlands +31 (0) 76-579-5555 +31 (0) 76-571-4958 fax South Africa +27 (0) 11-609-3101 +27 (0) 11-609-3110 fax Spain +34 (0) 91-484-5965 +34 (0) 91-484-3597 fax United Kingdom +44 (0) 1788-820300 +44 (0) 1788-820301 fax United States +1 (800) 445-3503 +1 (763) 783-2525 fax +1 (763) 783-2500 direct © 2008 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Results may vary under different operating conditions. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representatives for details. Literature Code PI.8026.0708 Process Instruments www.thermo.com/bulk-handling Microwave Point Level Detector – Physical Dimensions 153.0 mm (6.03 in) 305 mm (12.01 in) 160.0 mm (6.30 in) 130 mm (5.11 in) DN80 (3.0 in - NPT) 133.0 mm (5.25 in) 10.0 mm (0.38 in) UHMW FACE 85.0 mm (3.35 in) 133 mm (5.25 in) 160 mm (6.30 in) P/N 072604 MICROWAVE SENDER SUPPLY HOT SUPPLY 115 VAC +V GND ALIGN 100mA AC FUSE DC NEUTRAL GROUND TEST POWER GROUND APPLIED +24V