Insertion Turbine Flowmeters - Thermo Scientific - Process Systems - #6

Text version of the page

Specifications Model 5100 — Insertion Turbine Flowmeter for Liquid and Gas Functional Specifications Accuracy Liquids: ±2.0% of reading achievable (10 to 1 turndown) Gases: ±2.0% of reading achievable (5 to 1 turndown) Repeatability 0.2% Pressure Drop Liquids: Typically 300 mbar (1 psi) at normal maximum flow rate in water Gases: Negligible at 100% flow rate dependent on gas density Maximum Pressure 270 psig (18 bar) Maximum Process Temperature 150°C (300°F) Physical Specifications Materials Seal housing: Carbon steel (standard) or stainless steel Flanges: Forged carbon steel or stainless steel Shaft and sleeve bearings: Tungsten carbide and durable alloy Ball bearings: Stainless steel ANSI 440C Installation Install in pipeline with at least 10 pipe diameters of straight length upstream and 5 diameters downstream of flowmeter. Outputs Standard Pickup 100 m V pulse peak-to-peak at 1 m/s (3 ft/s) Process Instruments www.thermo.com Room 1010 - 1019 Ping’an Mansion No. 23 Jinrong Street Xicheng Dist, Beijing 100032 CHINA A-101, ICC Trade Tower, Senapati Bapat Road Pune 411016 Maharashtra, INDIA Ion Path, Road Three, Winsford Cheshire CW7 3GA UNITED KINGDOM 1410 Gillingham Lane Sugar Land, TX 77478 USA +86 (10) 5850-3588 +86 (10) 6621-0847 fax +91 (20) 6626 7000 +91 (20) 6626 7001 fax +44 (0) 1606 548700 +44 (0) 1606 548711 fax +1 (800) 437-7979 +1 (713) 272-0404 +1 (713) 272-4573 fax ©2007 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Results may vary under different operating conditions. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representatives for details. Literature Code PI.2036.0207 Model 5400 — Insertion Turbine Flowmeter for Low Flow Liquids Functional Specifications Accuracy Liquids: ±2.0% of reading achievable (5 to 1 turndown) Repeatability 0.2% Pressure Drop Liquids: Typically 300 mbar (1 psi) at normal maximum flow rate in water Gases: Not available Maximum Pressure 225 psig (15 bar) Maximum Process Temperature 150°C (300°F) Physical Specifications Materials Seal housing: 316 stainless steel Shaft and sleeve bearings: Tungsten carbide and durable alloy Installation Install in pipeline with at least 10 pipe diameters of straight length upstream and 5 diameters downstream of flowmeter. Outputs Standard Pickup 100 mV pulse peak-to-peak at 1 m/s (3 ft/s)