DCT6088 Digital Correlation Transit Time Flowmeter - Thermo Scientific - Process Systems - #1

Text version of the page

Product Specifications Thermo Scientific DCT6088 Dedicated Transit Time Flowmeter Flexible & Easy-to-Use Combining digital signal processing (DSP) with correlation detection methods, the Thermo Scientific DCT6088 features exceptional performance and flexibility. It tolerates higher concentrations of gas bubbles or entrained solids compared to traditional transit time flowmeters which are principally designed for extremely clean liquid applications only. The non-intrusive, clampon transducers can be installed without flow interruption and ensure leak-free measurements with zero pressure drop. The simple, menudriven operation of the DCT6088 allows the meter to be commissioned in a fraction of the time necessary for competitive transit time flowmeters. Engineered for Maximum Uptime Housed in a rugged IP65 enclosure and qualified for -40°C (-40°F) operation, the DCT6088 is well-suited to most industrial environments. The high resolution, backlit LCD provides excellent visibility even in poorly lit conditions. Outputs include a 12-bit digital, optically-isolated, 4-20 mA analog signal and RS232 serial interface. Programmable Relays for Remote Output Up to four programmable relays can be specified. The relays may be used as a contact output to a remote device such as an alarm, totalizer, sampler or chlorinator. A powerful 30,000 point data logger programmable in intervals of one second or more is also incorporated in the flowmeter. Modular & Simple to Service The plug-in, modular construction of the instrument simplifies field service and, in the unlikely event of failure, permits the boards to be replaced in seconds. The DCT6088 features many parts which are common to other Thermo Scientific flowmeters, dramatically reducing spare parts inventory at sites where multiple meters are in service. Sample Applications • HVAC • Potable water • Ultrapure liquid • Deionized water • Petroleum products • Water and waste management The Thermo Scientific DCT6088 advanced transit time flowmeter employs a unique digital correlation technique to reliably measure the flow of clean liquids. Designed for use on pipes of all sizes, the non-intrusive device is easy-to-install, simple to operate, and eliminates pressure loss and leakage which reduces downtime and increases profit potential. Features • Accuracy to ±0.5% of velocity full scale • 0.01 ft/sec flow sensitivity • Up to 4 programmable relays • Easy to install, clamp-on design • Bi-directional flow measurement • Powerful 30,000 point data logger The Thermo Scientific UltraScan program offers a simple method to configure the flowmeter and access to the extensive waveform diagnostics.