Thermowell Models
SW 3020 Threaded Thermowell -Tapered SW 3030 Threaded Thermowell -Straight
Solid drilled machined
thermowell.Wetted part: taperedHex. 27mm, 32mm or 36mm.Standard materials:
Stainless steel 304/304L,316/316L,
A105, 316Ti (1.4571) Hastelloy C4
(2.4610), Hastelloy C276 (2.4819),
Monel 400 (2.4360), Titan Grade 2
(3.7035) Other materials possible.Male process connection 1/2"NPT,3/4"NPT or 1"NPT.
Female connection 1/2"NPT, G 1/2".
Bore size Ø 6.6 mm standard.
Insertion length "U", connection length
"X"(standard 50 mm) and materials to
be specified by customer. Solid drilled machined
thermowell.Wetted part: straightHex. 27mm, 32mm or 36mm.Standard materials:
Stainless steel 304/304L,316/316L,
A105, 316Ti (1.4571) Hastelloy C4
(2.4610), Hastelloy C276 (2.4819),
Monel 400 (2.4360), Titan Grade 2
(3.7035) Other materials possible.Male process connection 1/2"NPT,3/4"NPT or 1"NPT.
Female connection 1/2"NPT, G 1/2".
Bore size Ø 6.6 mm standard.
Insertion length "U", connection length
"X"(standard 50 mm) and materials to
be specified by customer. Ordering codeType Ordering codeType SW 3020 SW 3030
SW 3040 Threaded Thermowell -Stepped FT 4020 Flanged Thermowell -Tapered to DIN 43772 Form 4F
Solid drilled machined
thermowell.Wetted part: stepped
Hex. 27mm, 32mm or 36mm.
Stepped from 17mm, 22mm or 25mm
to 13mm.
Standard materials:Stainless steel 304/304L,316/316L,A105, 316Ti (1.4571) Hastelloy C4
(2.4610), Hastelloy C276 (2.4819),
Monel 400 (2.4360), Titan Grade 2
(3.7035) Other materials possible.
Male process connection 1/2"NPT,
3/4"NPT or 1"NPT.Female connection 1/2"NPT, G 1/2".Bore size Ø 6.6 mm standard.
Insertion length "U", connection length
"X"(standard 50 mm) and materials to
be specified by customer. These
thermowells are made from barstock material acc. to DIN 43772 form
4F and have a welded process flange
DIN/EN DN 25 to DN 50 ( ASME 1" to
2" ).
They resist high stresses caused bystrong vibrations, flow rates, highpressures and temperatures.
Load diagram see DIN 43772
Length below flange and flange rating
to be specified.
Thermowell materials Stainless or
Heat-resistant steel: 1.4571, 1.4404,1.7335, 1.5415, 1.0460Other materials possible
Outer diameter: 18mm, 24mm, 26mm,
or 32mm.
Connection to thermometer Female
M18x1.5
Total length L1: from 110mm to410mm.Conical length L3: 65mm or 125mm.
Tip diameter: 12.5mm.
Bore size: 3.5mm, 6.6mm, or 7mm. Ordering codeType SW 3040 Ordering codeType FT 4020 H3-1 Rev.0 7/07 PO BOX 732640 AB PijnackerThe NetherlandsPhone +31 (0)15 - 3621200Fax +31 (0)15 - 3694082Email sales@thermo.nlInternet http://www.thermo-electra.com
