Catalogs >
Thermal Detection >
Validation Thermocouple Looms

Validation Thermocouple Looms
1Pages

Catalog excerpts

Validation Thermocouples in Looms Product Code: VTFP-LOOM Description: The preferred method of temperature measurement for pharmaceutical validation purposes is the Copper/Constantan type T thermocouple. A loom allows for easy placement and handling of a large number of long thermocouples when mapping a chamber. The loom is produced by bundling and securing pre-cut thermocouples, number and length as specified by the customer. The loom is reeled for ease of transportation to the customers site. Once the loom and hot junctions are in place, the cable ties can be removed by the engineer. The main wire types are: • PFA Extruded : Smooth, easy to clean. • PTFE Lapped: Tightly wrapped insulation minimises capillary action. • Kapton®: For high temperature applications such as depyrogenation. Weep holes can be specified for PFA insulated wires to counter any condensate travelling up the inner jacket of the thermocouple by capillary action. Encapsulation of the hot junction also reduces the incident of condensate penetration and further ensures that the rate of oxidisation of the thermocouple hot junction is reduced. For Kapton® wire a thin wall stainless steel tip can be specified for added hot junction protection. Available Optional Extras Conductor Max Temp Bare Hot Format °C Junction Teflon Encapsulated Hot Junction * Kapton® can go to 350°C for short periods Datasheet : 021 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Email: sales@thermal-detection.com Web: www.thermal-detection.com

Open the catalog to page 1

Validation Thermocouple Looms 1Pages

Catalog excerpts

All Thermal Detection catalogs and technical brochures

Validation Thermocouple Looms
1Pages