Room 405, Building 7, NO.555,
LR 52 series--- track rollers with cylindrical or crowned
Introduction
1. LR52 Series rollers are also called CAM ROLLERS, can be used in the heavy loads track or used as an idler wheel.
They are widely used in the particular application that the friction should be reduced.
2. The outer diameter surface of rollers is shaped to the crowned runner surface with R500 (suffix U), so make the
stresses well when rollers working.
3. Rollers take the internal structure design of deep groove ball
bearings or double row angular contact ball
bearings
and have a particularly thick-walled outer ring, so the rollers can accommodate higher loads.
4.Rollers are made of the high-quality
bearing steel, processed by heat treatment and precision grind, and are filled
with a long service life, high-grade and multi-purposes grease. Rollers take the metal shield (suffix KDD) or rubble
seal (suffix NPP) to prevent the dust.
THB also can provide the rollers with concentric or eccentric pivot. Some types of the rollers can be made from the
corrosion resistance stainless steel.
Characteristics of the guide system that series LR rollers are applied :
1. Low resistance, long service life, widely-use
Being cam rollers with crowned runner surface R500, make its stresses in well-distributed between rollers and track
when working, thus the stresses centralization are avoided, the friction resistance are reduced and the service life of rollers
row cam rollers can be relubricated through the filling hole on the inner ring to adapt the adverse working conditions.
2. Easy installation
After rollers assembled the concentric or eccentric pivot, installation can be made convenient. To adjust the eccentric one's
preload.
3. Smooth running, minimum error
Besides we produce the series LR cam rollers according to the standard of rolling
bearings, we also make the strict control
meet special working mode that inner ring is fixed while outer ring running.
