Rings - Retaining & Circlips A3000 Basic Internal Circlip American Spec - TFC - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for TFC

Retaining ring, Collar clamp, Hinge, Lip seal, Wave spring

Text version of the page

• Tapered design principle permits rings to maintain constant circularity and pressure against the bottom of the groove.

A3000 Basic Internal Circlip

AMERICAN SPECIFICATION

Alternative Lug:

Above 118 size

ci rclip in bo re

circlip in groove

Standard Material:

Carbon spring steel

Standard Finish: Phosphate & oil

Tc:

Allowable thrust load of circlip.

Tg:

Allowable thrust load of cold rolled steel groove.

Size Bore Code B

Groove W

Circlip D Tol

Tc Tg (lb.f) (lb.f)

Tol


025	0.250	0.268	±.001	.018	+.002	.027	.015		0.280		0.11	.13	530	130
031	0.312	0.330		.018	-.000	.027	.015		0.346		0.17	.19	660	160
037	0.375	0.397		.029		.033	.025		0.415		0.20	.22	1320	235
043	0.438	0.461		.029		.036	.025		0.482		0.23	.25	1550	285
045	0.453	0.477		.029		.036	.025		0.498	+.010	0.25	.27	1600	310
050	0.500	0.530		.039		.045	.035		0.548	-.005	0.26	.29	2470	425
051	0.512	0.542	±.002	.039		.045	.035		0.560		0.27	.30	2530	435
056	0.562	0.596		.039		.051	.035		0.620		0.28	.32	2780	540
062	0.625	0.665		.039		.060	.035		0.694		0.35	.39	3090	705
068	0.688	0.732		.039	+.003	.066	.035		0.763		0.41	.45	3400	855
075	0.750	0.796		.039	-.000	.069	.035		0.831		0.45	.50	3710	975
077	0.777	0.825		.046		.072	.042		0.859		0.47	.52	4610	1050
081	0.812	0.862		.046		.075	.042		0.901		0.49	.53	4820	1150
086	0.866	0.920		.046		.081	.042	±.002	0.961		0.54	.59	5140	1320
087	0.875	0.931	±.003	.046		.084	.042		0.971	+.015	0.55	.60	5190	1390
090	0.901	0.959		.046		.087	.042		1.000	-.010	0.58	.63	5350	1480
093	0.938	1.000		.046		.093	.042		1.041		0.61	.67	5570	1640
100	1.000	1.066		.046		.099	.042		1.111		0.68	.74	5940	1870
102	1.023	1.091		.046		.102	.042		1.136		0.70	.76	6070	1970
106	1.062	1.130		.056		.102	.050		1.180		.069	.75	7500	2040
112	1.125	1.197		.056		.108	.050		1.249		0.75	.82	7950	2290
118	1.188	1.262		.056		.111	.050		1.319		0.81	.88	8400	2490
125	1.250	1.330		.056		.120	.050		1.388	+.025	0.88	.95	8850	2830
131	1.312	1.396	±.004	.056		.126	.050		1.456	-.020	0.94	1.02	9300	3120
137	1.375	1.461		.056	+.004	.129	.050		1.526		1.00	1.08	9700	3340
143	1.438	1.528		.056	-.000	.135	.050		1.596		1.06	1.15	10200	3660
145	1.456	1.548		.056		.138	.050		1.616		1.08	1.17	10300	3790
150	1.500	1.594		.056		.141	.050		1.660		1.13	1.22	10600	3990
156	1.562	1.658		.068		.144	.062		1.734		1.15	1.24	11400	4240
162	1.625	1.725	±.005	.068		.150	.062	±.003	1.804	+.035	1.21	1.31	11800	4590
165	1.653	1.755		.068		.153	.062		1.835	-.025	1.24	1.34	12100	4760

All dimensions in inches unless otherwise stated. R>r Interchange listing see page 50.

..continued p3

SALES HOTLINES: TEL: 01435 866011 FAX: 01435 866620 Email: Sales@Jfcplc.com Web: www.tfcplc.com

ISSUE 4

Rings - Retaining & Circlips A3000 Basic Internal Circlip American Spec - TFC - #1

Retaining ring, Collar clamp, Hinge, Lip seal, Wave spring