Sound level measuring instrument - testo 816
2Pages

{{requestButtons}}

Catalog excerpts

Sound level measuring instrument - testo 816 - 1

Sound level measuring testo 816 - Sound level measuring instrument with AC/DC output for data readout Frequency evaluation according to characteristic curves A Maximum and minimum store Switchable time evaluation Fast/Slow Automatic range switchover AC and DC outputs for connection to further instruments The testo 816 is the ideal sound level measuring instrument for assessors, workplace measurements and for the measurement of industrial and environmental noise. Using the Fast/Slow button, the measurement time can be set from 1s to 125 ms, in order to better evalaute the noise source. The frequency analysis can also be switched from characterisitc curve A to C. The characteristic curve A corresponds to the sound pressure perception of the human ear, whereas characteristic curve C can also evaluate the low-frequency components of a sound. The testo 816 also has an AC and DC output. Via the AC output, recorders or amplifiers can be connected directly to the instrument, and via the DC output, graphical recorders or data loggers can be used easily and directly on site. The analog bar graph display offers the user a fast overview over the complete measuring range. With the help of the optional calibrator, the measuring instrument can be recalibrated directly on site with the screwdriver provided. The wind protection cap included in delivery ensures correct measurement results when measuring outdoors, and if required can protect the microphone from dirt and dust.

Open the catalog to page 1
Sound level measuring instrument - testo 816 - 2

Technical data / Accessories Technical data testo 816 testo 816 sound level meter Incl. microphone, wind protection cap, battery, stereo jack 3.5 mm In system case with batteries Section meas, ranges: 30 to 80 dB; 50 to 100 dB; 80 to 130 dB Time weighting: FAST 125 ms setting / SLOW 1 s setting Pressure dependency: -0.0016 dB/hPa Technical data Sound level calibrator Sound pressure level: 94 dB/104 dB, switchable Also suitable for 1/2 and 1 Inch microphones by other manufacturers Accessories for measuring instrument

Open the catalog to page 2

All TESTO catalogs and technical brochures

  1. testo 317-3

    4 Pages

  2. testo 316-1

    8 Pages

  3. testo-315-3

    4 Pages

  4. testo 440

    12 Pages

  5. testo 400

    12 Pages

  6. Huminator

    2 Pages

Archived catalogs