41

Accessories/ Technical datatestostor 171-8

Accessories, Transport and Protection Part no.

Heat-proof case with heat-proof insert, rubber seal, 4 clamp screwconnections for thermocouples with diameter of 1.5 mm , protects testostor 171-8 from hot environment0553 1701

Recommended Set:testostor 171-8

testostor 171-8, temperature data logger, 4 channels, withstarting magnet, battery and calibration protocol0577 1718ComSoft 3 - Professional with data management0554 0830 Holder with lock for data logger, theft-proof0554 1782 4 x Immersion tip, flexible, TC Type K0602 5792 Extension cable, 5m, for thermocouple probe Type K0554 0592

Additional accessories and spare parts

Interface, attachable to testostor 171 data logger0554 1781Display can be attached to data logger0554 0176 Display can be attached to data logger, for quick checks on site0554 0176 Display with print option, can be attached to data logger, for quickchecks on site0554 0175 Optical alarm display for data logger, battery-operated, warns if limitshave been exceeded0628 0025 Transport case (plastic) for data loggers (max. 5 off) andaccessories0516 0117 Spare battery for testostor 171, quick and easy battery replacement0515 0018

Printer and Accessories

Testo printer with wireless IRDA and infrared interface, 1 roll of thermalpaper and 4 AA batteries, for printout of reading on site0554 0547 External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech.batteries with individual cell charging and charge control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug, 100-240 V, 300 mA, 50/60 Hz0554 0610

Technical data

Spare thermal paper for printer (6 rolls)0554 0569 Probe typeType K (NiCr-Ni) Type T (Cu-CuNi) Meas. range-200 to+1000 °C±(0.4 °C±0.2% of mv)0.1 °C(-200 to+249.9 °C)1 °C(+250 to+1000 °C)0 to+70 °C-40 to+85 °CBattery typeLithium batteryIP4255000305 gWeightWarrantyMeasuring rate: 2s to 24h, selectableBattery life: up to 5 yearsSoftware: Menu-driven from MicrosoftWindows 95 / NT 4 Service pack 4 2 yearsAluminium, anodized131 x 68 x 26 mm -50 to+350 °C±(0.4 °C±0.2% of mv)0.1 °C(-50 to+249.9 °C)1 °C(+250 to+350 °C) Spare thermal paper for printer (6 rolls), measurement datadocumentation legible for up to 10 years0554 0568 Accuracy±1 digitResolutionOper. temp.Storage temp.

Software and Accessories

ComSoft 3 - Professional with data management, incl. database,analysis and graphics function, data analysis, trend curve0554 0830 ComSoft 3 - For requirements to CFR 21 Part 11, incl. database,analysis and graphics function, data analysis, trend curve (w/o interface)0554 0821 Interface, attachable to testostor 171 data logger0554 1781 Material/Housing Warranty2 yearsAluminium, anodized 260 x 160 x 90 mmDimensionsWhen the heat-proof case is used, the datalogger can handle processes with anoperating temperature of up to +200°C Material/Housing Transport case (plastic) for data loggers (max. 5 off) and accessories, forsafe transport0516 0117 Ethernet adapter, RS232 - Ethernet incl. software driver, mains unit,facilitates data communication in network0554 1711ISO calibration cert./temperature, temperature data logger; calibrationpoints selectable from -196 to +1300°C 0520 0141

Calibration Certificates

DimensionsProtection classMemory ISO calibration certificate/temperature, temp. data logger; calibrationpoints -8°C; 0°C; +40°C0520 0171 DKD calibration certificate/temperature, data logger, transmitter, probewithout display; cal. points freely selectable from -196 to +1000°C 0520 0281

Heat-proof case

Temperature