Material moisture, air moisture and temperature in one instrument Measures differential pressure 0 to 100 hPa – Practical and robust

testo 606

testo 606-1 measures materialmoisture. Using stored materialcharacteristic curves for woodand building materials, material moisture is shown directly inpercent by weight.In addition to material moisture,testo 606-2 also measures airmoisture and temperature. In thisway, drying conditions, for example, can be reliablyassessed on-site.•Accurate wood moisturemeasurement with storedcharacteristic curves for beech,spruce, larch, oak, pine, maple •Additional characteristic curvesto locate wet points in buildingmaterials for cement screed, concrete, plaster, anhydritescreed, cement mortar, limemortar, brick•Hold function for easy readoutof readings

Safe storage andtransport thanks toprotective cap, wrist strapand belt caseFast and easy wood moisture measurement

Additional a advantages o of t testo606 -2 2 •Measurement of temperatureand humidity in ambient air•Incl. dewpoint calculation andwet industrial bulb testo 606-1 testo 606-2

Probe type
Material moisturebased on conductivity NTC Testo humid. sensor,cap. testo 606-1; wood and materialmoisture meter, incl. protective cap,batteries and calibration protocol testo 606-2; wood and materialmoisture meter with built-in moisturemeasurement and NTC airthermometer, incl. protective cap, batteries and calibration protocol Accuracy±1 digit±1 %(Conductivity)Meas. range0 to90 %Resolution0.1 ±0.5 °C-10 to+50 °C0.1 °C ±2.5 %RH(5 to95%RH)0 to100 %RH0.1 %RH Part no.0560 6060 Part no.0560 6062 Oper. temp.-10 to+50 °C Accessories Ordering data Part no. Technical data606-1/-2606-2 Battery life testo 606-1: 200 h(average, without display illumination)
For testo 606-1: Spare electrodes (1 pair) 0192 5358 testo 606-2: 130 h(average, without display illumination)
For testo 606-2: Spare electrodes (1 pair) 0192 5348 Dimensions119 x 46 x 25 mm(incl. protective cap) Differential pressure measurement on a gas heater

testo 510

testo 510's differential pressuremeasurement is temperature- compensated for more accurate readings. The readings can be displayed in Pascal over the whole measurement range.Magnets on the back of theinstrument allow you to work hands-free, for example, when tuning gas heaters. When used together with a Pitot tube, testo 510 measures air velocity. Air density can be compensated for accurate readings. •Magnetic rear permits free-handwork•Flow velocity measurement withPitot tube (Pitot tube not included in delivery)•Display in Pascal possible overentire measurement range

Safe storage andtransport thanks to protective cap, wrist strap and belt case

testo 510

testo 510; differential pressure meterincl. protective cap, batteries and calibration protocol Technical data Part no.0560 0510 Probe typeDifferential pressure probe Accessories Ordering data Part no. Meas. range0 to100 hPa
Hose set: Connection hose, silicone, 2 m long, max. load 700hPa (mbar) 0554 0448 Accuracy±1 digit±0.03 hPa(0 to0.30 hPa)±0.05 hPa(0.31 to1.00 hPa)±(0.1 hPa+ 1.5 %of mv) (1.01 to100 hPa)
Pressure set with flue draught probe, includes 2 x silicone hoseseach with Ø 4mm and Ø6mm, 4mm and 6mm T-piece, connecting piece 0554 3150 Resolution0.01 hPa
Pitot tube, 350 mm long, stainless steel, for measuring flowvelocity 0635 2145 Selectable unitshPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psi, m/s,fpm
Pitot tube, 500 mm long, stainless steel, for measuring flow velocity 0635 2045 Oper. temp.0 to+50 °C
ISO calibration certificate/Pressure, Differential pressure; 3 pointsdistributed over meas. range 0520 0095 Battery type2 batteries Type AAA
ISO calibration certificate/pressure, differential pressure; 5 points distributed over meas. range Battery life50 h(average, without display illumination) 0520 0005 Dimensions119 x 46 x 25 mm(incl. protective cap)