video corpo

MAC 25-3
16Pages

{{requestButtons}}

Catalog excerpts

MAC 25-3 - 1

PICK & CARRY CRANE DATASHEET - METRIC ► 18 m maximum hook height ► Hook block (6 parts) capacity 25 tonne ► Single line 4.2 tonne

Open the catalog to page 1
MAC 25-3 - 2

CONTENTS MAC 25-3 Page: Key .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dimensions Crane dimensions .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5 Range diagram.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Area of operation .. . . . . . . ....

Open the catalog to page 2
MAC 25-3 - 3

Boom length Hook height Slewing / Allowable slewing range jjQJ^j Crane / Crane in standard configuration Telescoping mode Boom elevation angle gf ^ Gross vehicle weight Working radius Main winch Winch speed Operator aids / Load limiter / Load indicator Rope - Standard / Optional Rope diameter Rope length Maximum line pull

Open the catalog to page 3
MAC 25-3 - 4

Crane Dimensions (Ref to centre of steering wheel)

Open the catalog to page 4
MAC 25-3 - 5

DIMENSIONS MAC 25-3 Crane Dimensions 3075 mm 2720 mm 5

Open the catalog to page 5
MAC 25-3 - 7

AREA OF OPERATION MAC 25-3 <10º ARTICULATION ZONE 10° > 7 ºA 10 IC RT UL ON ATI Z ONE 40° 10° >10 º AR TI CU 4 0° LA TIO N ZO NE

Open the catalog to page 7
MAC 25-3 - 8

LOAD CHART Fallblock, Front Counterweight, 3rd Boom Retracted Pick & Carry 0.4 m/s (1.44 km/h); On rubber 66.6% *ff 6.12-14.32m AS 1418.5 [(T| Radius at 0° boom angle \ Loads above red line are structural Notes to lifting capacity Lifting capacities do not exceed 66.6% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult Rated Capacity Manual for further details. Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to...

Open the catalog to page 8
MAC 25-3 - 9

LOAD CHART Fallblock, Front Counterweight, 3rd Boom Extending Pick & Cany 0.4m/s (1.44 km/h); On rubber 66.6% [(T| Radius at 0° boom angle \ Loads above red line are structural Notes to lifting capacity Lifting capacities do not exceed 66.6% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult Rated Capacity Manual for further details. Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and Rated...

Open the catalog to page 9
MAC 25-3 - 10

LOAD CHART Fallblock, Rear Counterweight, Third Boom Retracted Pick & Carry 0.4 m/s (1.44 km/h); On rubber 66.6% *ff 6.12-14.32m AS 1418.5 [(T| Radius at 0° boom angle \ Loads above red line are structural Notes to lifting capacity Lifting capacities do not exceed 66.6% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult Rated Capacity Manual for further details. Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to...

Open the catalog to page 10
MAC 25-3 - 11

LOAD CHART Fallblock, Rear Counterweight, Third Boom Extending Pick & Cany 0.4m/s (1.44 km/h); On rubber 66.6% [(T| Radius at 0° boom angle \ Loads above red line are structural Notes to lifting capacity Lifting capacities do not exceed 66.6% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult Rated Capacity Manual for further details. Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and Rated...

Open the catalog to page 11
MAC 25-3 - 12

TECHNICAL DESCRIPTION Four section boom: 9-// Main boom and three powered sections Maximum hook height Boom elevation angle range (min. / max.) Maximum hook height with jib 40° articulation each side of centre providing a total 80° slewing arc Machinery hook Fully compensated hook height when telescoping boom 1 and 2 Anti two-block system Maximum line pull Hook block, two, four, or six part, maximum rated capacity Mercedes OM 906 EUROMOT 3a turbo charged and intercooled diesel engine with hinged engine cover and mid cover for easy serviceability Engine torque Fuel capacity Fuel type...

Open the catalog to page 12
MAC 25-3 - 13

TECHNICAL DESCRIPTION Hydraulic System Hydraulic Pump: Load sensing axial piston Maximum pump flow rate Maximum working pressure Hydraulic tank with top mounted return and in-tank suction filters Drive axles: Kessler D71 PL477 heavy duty high speed planetary axle Front axle fitted with driver selectable diff lock and reinforced for pick and carry operation Removable counterweight on front: p" VT^IS___ Removable counterweight on rear: gU=<pi Front axle 9,900 kg Full power Orbitrol with twin hydraulic double acting rams Priority flow from main pump supply plus electro-hydraulic emergency...

Open the catalog to page 13
MAC 25-3 - 14

TECHNICAL DESCRIPTION Vehicle performance Maximum rated travel speed Cab, Controls, and Operator aids Two person, insulated lock up cabin: KAB suspension driver's and passenger seats, including retracting seat belts Radio/CD player with Bluetooth handsfree Reversing camera Centralised greasing Cruise control Engine monitoring Service diagnostics 3B6 rated capacity indicator with audio/visual overload pre-warning 3 pilot control levers for crane functions

Open the catalog to page 14
MAC 25-3 - 16

MAC 25-3 BRISBANE MELBOURNE 585 Curtin Avenue East Eagle Farm QLD 4009 AUSTRALIA 187 Osborne Avenue Clayton South VIC 3169 AUSTRALIA Ph: +61 7 3868 9600 Fax: +61 7 3268 2489 Ph: +61 3 9551 8644 Fax: +61 3 9551 8143 SYDNEY PERTH 114 Hassall Street Wetherill Park NSW 2164 AUSTRALIA 39 Catalano Road Canning Vale WA 6155 AUSTRALIA Ph: +61 2 8786 4444 Fax: +61 2 8786 4455 Ph: +61 8 9232 0000 Fax: +61 8 9232 0051 www.terexcranes.com Effective Date: September 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document...

Open the catalog to page 16

All TEREX CRANES catalogs and technical brochures

  1. TRT70US

    32 Pages

  2. TRT40US

    8 Pages

  3. TRT 65

    6 Pages

  4. CSE 40

    8 Pages

  5. CSE 36

    8 Pages

  6. CSE 30

    8 Pages

  7. TRT 90

    36 Pages

  8. TRT 80

    44 Pages

  9. TRT 100US

    6 Pages

  10. CTT 182-8

    16 Pages

  11. CBR 28 PLUS

    6 Pages

  12. Ctt 172-8

    24 Pages

  13. MAC 25-4

    8 Pages

  14. AT22

    7 Pages

  15. RT 100US

    24 Pages

  16. CTT 132-6

    16 Pages

  17. FC 6.24H

    8 Pages

  18. RT 100

    22 Pages

  19. RT 100US

    26 Pages

  20. RT 90

    24 Pages

  21. RT 1080L

    24 Pages

  22. AT 40

    8 Pages

  23. AT 15-3

    22 Pages

  24. RT 1080

    20 Pages

  25. RT 1070

    24 Pages

  26. RT 1045L

    28 Pages

  27. RT 1045

    24 Pages

  28. RT 35-1

    24 Pages

  29. Boom trucks

    16 Pages

  30. AC 700

    62 Pages

  31. AC 500-2

    62 Pages

  32. AC 250-1

    40 Pages

  33. Explorer 5600

    42 Pages

  34. Explorer 5500

    42 Pages

  35. AC 40-2L

    32 Pages

  36. RS 70100

    12 Pages

  37. BT 3870

    16 Pages

  38. CROSSOVER 8000

    28 Pages

  39. CROSSOVER 6000

    20 Pages

  40. CROSSOVER 5000

    20 Pages

  41. TC 2800-1

    70 Pages

  42. AC 40 City

    26 Pages

  43. CD 225

    22 Pages

  44. AT 20-3

    16 Pages

  45. AT-15-3

    16 Pages

  46. Truck cranes

    16 Pages

Archived catalogs