TELE Catalogue - Tele Haase Steuergeräte - #51

f3j@|0 Sensing & Monitoring Relays Series ENYA

Automation components Level monitoring

Level monitoring of conductive liquids Multifunction

Reinforced insulation of the measuring circuit 1 CO contact Width 35mm Installation design

---------

Art.No. (PQ1) Art.No. (PQ10) EAN13-Code

1341500

900866200509

Measured variable

conductiv probe min. conductiv probe max.

Measured range Probe voltage Probe current Wiring distance

0,25 to 100kO

12V AC

max. 7mA

max. 1000m (adjustment <50%) max. 100m (adjustment <100%) capacity of cable 100nF/km

Control

Delay ON • Delay OFF • Sensitivity • Function

Indicators (LEDs)

U • R

Pump up Pump down

0,25 to 100 kO (Sensitivity)

trigger level Tripping delay Turn-off delay Supply

0,5s to 10s

0,5s to 10s

230VAC

terminals A1-A2

Output

1 CO contact

250V, 5A AC

Width

35mm

Certificates

Mechanical design

Terminal capacity

CE

Self-extinguishing plastic housing, IP rating IP40 • Mounted on DIN-Rail TS 35 according to EN 50022 • Mounting position any • Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque max. 1Nm

1 x 0,5 to 2,5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0,5 to 1,5mm² with/without multicore cable end •

2 x 2,5mm2 flexible without multicore cable end

Ambient temperature: -25 to +55°C (according to IEC 68-1) • Storage temperature: -25 to +70°C • Transport temperature: -25 to +70°C • relative humidity: 15% to 85% (according to IEC 721-3-3 class 3K3) • Pollution degree: 2, if built in 3 (according to IEC 664-1) • Vibration resistance: 10 to 55Hz 0,35mm (according to IEC 68-2-6) • Shock resistance: 15g 11ms (according to IEC 68-2-27)

Ambient conditions

Accessories

Page 51