Text version of the page

Setting the Running Range at Setting the Rising Time of the Setting Speed for Emergency DC Brake Value [dC]Low Speed for the Actuator [SL] Motor [St][Sd] DC brake value of current has 0-7 Within the setting range, the The setting range is 0-10 second(s), Valve opening and closing speed grades for selecting. Grade 0 is non-actuator will run at a very low that is, the time for the motor under an emergency can be set. brake, and grade 7 is the largest speed. For example, 5% shows that, reaching the fastest running speed There are 0-7 grades for selecting. current brake. This option affects within the range of 0%-5% and from the bottom. This option affects Grade 0 is the lowest speed, and temperature rising of the motor and 95%-100%, it will runs at low control precision and the length of grade 7 is the highest speed. Select control precision. Select speed. Select appropriate range the time for putting through the appropriate value with + or - key, appropriate value with + or - key, value with + or - key, and press motor. Select appropriate rising and press “enter” key. (refer to and press “enter” key. (refer to “enter” key. (refer to picture 4.4.13) time with + or - key, and press picture 4.4.15)picture 4.4.16) “enter” key. (refer to picture 4.4.14) Fig.4.4.13Fig.4.4.14 Fig.4.4.15 Fig.4.4.16

Intelligent electric actuator - 38676 - 16 -