LCR Precision Instrument - Tecpel Co., Ltd. - (Version JPG) - Page n° 2 - PDF Catalogue | Technical Documentation

See other catalogues for Tecpel Co., Ltd.

Tester, Infrared thermometer, Data-logger, Probe, Multimeter

Text version of the page

LCR 200 SPECIFICATIONS

DC Voltage Measurement:


Range	2V. 20V. 200V and 600V
Resolution	ImV. lOmV. lOOmV. IV
Accuracy	± (0.4%+3digit)
Input Impedance	IMQ
*AC Voltage Measurement (True RMS):*
Range	2V. 20V. 200V and 600V
Resolution	lmV.IOmV.IOOmV.lv
Accuracy	± (0.8<7r+5digit) @ 40 Hz -	1 KHz
Input Impedance	1 MQ
*DC Current Measurement:*
Range	2A. 0.2A. 20mA and 2mA
Resolution	1mA, 0.1mA. 0.01 mA and 1	uA
Accuracy	±(0.4%+3digil)
Current Shunt	0.IQ<» current > 20mA I0Q @ current < 20mA
*AC Current Measurement (True RMS):*
Range	2A. 0.2A. 20mA and 2mA
Resolution	1mA, 0.1mA, 0.01 mA and 1	UA
Accuracy	± (0.8%+5digil) @ 40 Hz -	1 KHz
Current Shunt	0.1 Q @ current > 20mA 10Q@ currents 20mA
*Continuity Check:*
Continuity Threshold	50Q (Approximately)
Continuity Indicator	Tone Buzzer
Input Protection	600V (max)
*Diode Test:*
Test current	2.5mA (Typical)
Open circuit voltage	5.0VDC (nominal)
Input protection	600V (max)
*General:*
Temperature	0 to 40° C (Operating) -20 to 70° C (Storage)
Relative Humidity	Up to 85%
AC Power	ll()V/220V± 10%, 60/50H2
Dimensions	300mm x 220mm x 150mm
	( H.8"x8.7"x5.9")(DxWxH)
Weight	4.5 kgs
*Standard Accessories:*
©TL09C Kelvin clips	pe-
© Test leads	pe

Test condition:

Frequency : IOOHz/1201-iz/l KHz/

l()KHz/l()0KHz/200KHz

Level : I Vrms/250mVrnis/

50mVrms/l Vdc (DCR only)

Measuremeni Parameters : Z. Ls. Lp. Cs. Cp. DCR.

ESR. D. Q and 9

Basie Aecuraey : (). I

Dual Liquid Crystal Display with LED baeklil

Auto Range or Range Hold selection

Open/Short Calibration

RS232C Interface

Primary Parameters Display:

Z : AC Impedance

DCR : DC Resistance

Ls : Serial Inductance

Lp : Parallel Inductance

Cs : Serial Capacitance

Cp : Parallel Capacitance

Secondary Parameters Display:

9 : Angle Impedance

ESR : Equivalent Series Resistance

D : Dissipation Factor

Q : Quality Factor

Combinations of Display:

Serial Mode : Z-9. Cs-D. Cs-Q, Cs-ESR,

Ls-D. Ls-Q. Ls-ESR Parallel Mode : Cp-D. Cp-Q. Lp-D. Lp-Q

DMM Functionalities: DCV. ACV. DC A. ACA. Diode/Continuity Check Measurement Range:

Optional Accessories:

Specifications subject to change without notice.