Text version of the page

D

IMENSIONS

, S

PECIFICATION

, O

RDERING

I

NFORMATION

ISCM4805 / ISCM8005

ISCM4805 / ISCM8005 v1.3ISCM4805 / ISCM8005 - DIN v1.3

A1A2A3A4A5A6A7A8A9A10A11 A12A13A14A15A17 +V MOT A / A+B / A- C / B+BRAKE / B-+5VENCA+ENCB+ENCZ+ / CAPIPULSE/ IOLSP ENABLE / AUTOGNDCAN_HTX232FEEDBACK / IOHALL_1 A16 B1B2 B3B4B5 B6B7B8 B9 B10B11B12B13B14 B15 B16 +V MOT A / A+B / A-C / B+BRAKE / B- LOG _ /LH1 CAN_LGND +V _ /LH2ENCA _ /LH3ENCB _ 2ENCZ HALL _ 3HALL LSN REF / DIR / IORX232 B17 Drawings not to scale

E

ASY

M

OTION

S

TUDIO

ISCM4805 / ISCM8005 I

NTELLIGENT

S

ERVO

M

ODULES

The high level graphicaldevelopment environment EasyMotion Studio, supports the configuration, parameteri- zation and programming of the drive, through•Motion system set-up wizard•Tuning assistance •Definition, programming andtesting of motion sequences Electrical Specifications ISCM4805 ISCM8005

DC supply voltage: logic 12-48V motor 12-48V 12-80V Maximum continuous current 5A Peak current (100 ms. max.) 16A Minimal load inductance 200 microHenry* 330 microHenry* Nominal switching frequency 20kHz Operating ambient temperature 0°C-40°C
*at 48V (ISCM4805) / 80V (ISCM8005) and 20kHz switching frequency Ordering Information

M

OTION

C

ONTROL

L

IBRARIES P047.001.E201ISCM4805 Servo Module, 48V, 5A, CAN

The TML_LIB Motion Control Libraries can be used to implement a motion control application on a PC from Visual C / C++, C#, Visual Basic, Del- phi or LabVIEW under Windows or Linux operating systems. If a PLC is used as host, implementations of the TML_LIB observing the IEC 61131 standard are available for Siemens and Omron PLCs.

P047.001.E211ISCM4805 Servo Module, 48V, 5A, CANopen P047.001.E301ISCM8005 Servo Module, 80V, 5A, CAN HeadquartersSWITZERLAND
P047.001.E311ISCM8005 Servo Module, 80V, 5A, CANopen Tel.: +41 32 732 5500Fax: +41 32 732 5504
P052.001.E201ISCM4805 Servo Module, 48V, 5A, DINrail, CAN P052.001.E211ISCM4805 Servo Module, 48V, 5A, DINrail, CANopen sales@technosoftmotion.com
P052.001.E301ISCM8005 Servo Module, 80V, 5A, DINrail, CAN GERMANY
P052.001.E311ISCM8005 Servo Module, 80V, 5A, DINrail, CANopen Cell: +49 (0)1718 077 664 Tel.: +49 (0)7231 424 919Fax: +49 (0)7231 424 920
P047.001.E084ISCM4805 Starter Kit for Brushless Motor P047.001.E085ISCM4805 Starter Kit for Stepper Motor sales.de@technosoftmotion.com
P047.001.E184ISCM4805 I/O board P034.001.E002EasyMotion Studio software BENELUX Tel.: +32 (0)14 21 13 21Fax: +32 (0)14 21 13 23
P040.001.ExxxTML_LIB Motion Libraries**

ISCM S

TARTER

K

IT **ask for existing libraries types sales.be@technosoftmotion.com

Complete evaluation packages for the ISCM drives, containing the servodrive, motor, I/O board, EasyMotion Studio software that are supported by a collection of application notes anddocumentation.

F

LEXIBILITY

Standard control schemes supported by the ISCM Drives EASTERN EUROPE Tel.: +40 (0)21 425 90 95Fax: +40 (0)21 425 90 97 Motor TypesPositioncontrol Torquecontrol Speedcontrol sales.ro@technosoftmotion.com Brushless DC / ACDC Brush Linear Step UNITED STATES Tel.: +1 734 667 5275Fax: +1 734 667 5276 sales.us@technosoftmotion.com
P091.047.052.ISCM.LFT.0309 www.technosoftmotion.com