PELEC638 / PELEC638R
2Pages

// EDAK 1/ EDAK 1.5 ; TEIDAK TE Instruments offers a complete redesigned PCB EDAK board for your old analyzer with the extra possibility of using the latest TEIS software. The electronic platform used in the former Thermo SphiNCX analyzers supplied from 2002 and later is called EDAK board. Many of these boards fail within the lifetime of the analyzer. Obtaining an original EDAK board has proven to be difficult, costly and no guarantee for problem free operation. TE Instruments provides a future proof and cost effective solution: the EDAK BOARD Over the years the original EDAK circuit boards have become difficult to obtain and very expensive. Many of its components are obsolete or have been replaced by inferior substitutes. In addition, connecting the circuit board to a modern PC is a challenge: • Firmware for the board is hard to find • Only up to Windows 7 supported Historically, a lot of effort was required to maintain operation for EDAK boards, resulting in high maintenance and operation costs to keep the analyzer SOLUTION OF TE INSTRUMENTS: THE TEIDAK Therefore TE Instruments developed an alternative. Instead of trying to supply customers the original EDAK boards, we offer a future proof and cost effective The solution is a re-design, backwards compatible for all above mentioned analyzers. The size (dimensions) of the board and layout of the von board' connectors are exactly the same. Replacing this circuit board is even easier due to less connectors. Plug it in and start The TEIDAK is backwards compatible for all version of EDAK boards, the UNCO electronics are not supported. The EDAK board has been used in the following • TN/TS 3000 (nitrogen CLD and sulfur UV) • TN/TS/TX 3000 (nitrogen CLD, sulfur UV and/or chlorine/sulfur MCT) • DeXtar (chlorine and sulfur MCT) • SphiNCX (nitrogen CLD, sulfur UV and/or chlorine/sulfur MCT) Trace Elemental SAMPLERS SUPPORTED • NeXYZ (liquids sampler) The ECA 170D and ESA 2000 are obsolete and have a small Install base. Contact TE Instruments when one of the samplers are present in the requested configuration prior to offering the TEIDAK. The TEIDAK is fully compatible with ThEuStm software. Replace the board and start analyzing immediately. Running the TEIDAK with the latest TE Instruments Software (TEIS) requires adjustments regarding configuration and methods. These adjustments are supported and will be made by TE Instruments. Requesting a possible upgrade to TEIS must be made, prior to offering the solution to the customer. There are additional costs involved regarding the upgrade, please contact your TE Instruments representative for more

TE Instruments offers an upgrade for your Thermo™ 3000-series combustion analyzer with the ARCHIE auto sampler. Trace Elemental Broken ELS 3000 or NeXYZ auto sampler? Tired of spending your budget on repairs? Trace Elemental Instruments has developed a powerful upgrade for your legacy TN/TS 3000 series combustion analyzer, the advanced ARCHIE liquids auto sampler. The first auto sampler for the 3000 series was the ELS auto sampler. Both auto samplers have become obsolete and are no longer available. Spare parts for the ELS 3000 as well as the NeXYZ are expensive and hard to The future proof...