GLS & GBS
4Pages

Configuration: GLS with safety lock* Gas and LPG sampling made easy! TE Instruments presents the next generation Gas & LPG sampling systems; the GLS and GBS. Analyzing gas and liquefied gas is often seen The GLS and GBS both form a perfect match together with the X PLORER combustion analyzer The chosen sampling technique and ability to for the measurement of Total Nitrogen, Total handle different kinds of gas at different Sulfur and Total Chlorine. Both instruments can be combined as stand-alone sampling system with any other combustion analyzer. unique sampling systems: • The GLS (Gas & Liquefied gas Sampling module) for sampling gas and LPG from pressurized gas cylinders. • The GBS (Gas Bag Sampling module) for sampling gas from gas bags (e.g. Tedlar TM bags) or balloons

and therefore more reliable results. Taking simplicity to the next level Communication between the XPLORER and the GLS or GBS runs via an USB port. Within a few Two integrated loops; one with a volume of 10 minutes the sample is measured and the final result calculated and stored for reviewing. gas are the standard built-in sampling loops for the GLS. Simply position the pressurized methods in the embedded software can be operator. flow combustion analyzer. pressure are automatically controlled and The chosen analysis method is being executed and the pre-set number of sample loops is run...

Ultra-low detection The GLS is able to handle liquefied gas samples at the same ultra-low level as liquid samples: 20 ppb Sulfur / Nitrogen. Components in gas can usually not be measured at the same low level as liquid or liquefied gas samples because of the physical laws applicable. However the GLS and GBS are able to handle these kind of samples perfectly, both sampling systems demonstrate a detection limit in the low ppb’s with outstanding repeatability. Configuration: GBS* Truly unique: calibrating out of a single CRM The GLS and GBS are both able to create a calibration line out of a...

Features GLS - Save installation high pressured gas bottles - Fully automated - Software controlled - Integrates with TE Instruments software - Stand-alone function - Intuitive touchscreen - Default & customized methods - Two separate sample channels for Gas & LPG - Calibration line from single CRM - Safety lock option - Heated pressure control & vaporizer GBS Specification Dimensions (W x H x D) Weight Carrier gas connection Carries gas Primary pressure gas sample Calibration Sample Sample volume Operation mode Vent gas connection Configuration: XPLORER with ARCHIE and GLS* Features GBS -...