Catalogs >
TE CONNECTIVITY >
STD and STB Markers

STD and STB Markers
3Pages

Catalog excerpts

TECHNICAL DATA SHEET TE Document: TTDS-094 • Zero Halogen • Excellent Resistance to Burning - UL94 HB rated • UV stabilised material - On black marker with white legends • Resistant to key fluids, including those used in Energy, Oil refineries, Aviation and Military (defined by RW-2538) STD and STB Markers STD and STB markers are individual snap on markers used to identify wires and small cables permanently. STD markers are white and yellow. STB markers are colour coded. Markers are side-entry installed using an applicator wand, so allowing identification after termination and/or installation. These markers have an expanding profile which enable markers to accommodate a wide range of wire and small cable sizes. Markers are supplied chevron cut to ensure the legend remains aligned. Manufactured using a zero halogen polyoxymethylene (POM) compound, this marker lends itself to installations where a permanent solution is required. Ideally suited for use in Energy projects including power stations, oil refineries and offshore platforms. Operating Temperature Range -40°C to 106°C (-40°F to 223°F) No Halogens, Sulphur, Nitrogen, Phosphorus and Cadmium sources above trace level Information and a downloadable declaration covering RoHS and REACH compliance can be found at the 'TE Product Compliance Support Centre': http://www.te.com/en/resources/product-compliance.html • Ten sizes for cable diameters 1.0 to 19.0mm (0.04 to 0.75 inches) • Secure grip for positive fixing to cable • Applicator wands available for easy marker installation SPECIFICATIONS / APPROVALS TE Connectivity Standard • RW-2538PART DESCRIPTIONSTD - Standard marker STD 06 W -4 Legend code Color code - Size ■ Product family • Applicator has a patented slit to prevent over-expansion of the marker during application • The high elasticity of the marker enables material to be installed without damaging the substrate APPLICATIONS • Post termination cable identification • Identification of small wires and cables, including optical fibres. • Ideally suited for use in Energy projects including power stations, oil refineries and offshore platforms. STB - Color coded marker STB 06 -4 -2 Color code Legend code Product family Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2538. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved Class I Data Classification - See Policy TEC-02-04

Open the catalog to page 1

Open the catalog to page 2

TECHNICAL DATA SHEET TE Document: STD and STB Markers LEGEND CODE Legend While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied...

Open the catalog to page 3