P350 Pin Insertion Machine - TE Connectivity Application Tooling - #1

Text version of the page

P350 Pin Insertion Machine Fast Facts • Insertion rates up to 5 per second at 0.2 in [5.08 mm] pitch. • Up to 3 different products can be applied in one machine. • Apply products at up to 7 different angles. • Active anvil for PCB support, insertion verification and force monitoring. • Windows based touch screen interface. • Quick change tooling packs allow production flexibility. • Able to process any manu-facturer's reeled through-hole or press-fit products. • Range of options including PCB vision system and board thickness measurement. • SMEMA interface The P350 is a fully automatic pin insertion machine capable of applying reeled prod­ucts from TE or other manufacturers. With inline operation, an automatic tool changer and insertion rates up to 5 per second, it is focused at fully automatic high speed operation to maximize through put while minimizing costly scrap. A servo powered XY table positions the PCB under a central drive station at high speed. The automatic tool changer can hold up to 3 insertion heads each capable of applying a different product. A unique rotary insertion finger allows the applica­tion of products at up to 7 different angles without rotating the PCB. This allows the P350 to apply product at different angles without a reduction in insertion rate or the potential positioning error associated with PCB rotation. An active lower anvil pro­vides support to the PCB during insertion, can provide special actions such as clinch-ing (when applicable) and allows for real-time force monitoring for 100% quality assurance on press-fit applications. Finally, icon driven software with touch screen provides a simple to use and intu­itive operator interface. The P350 provides a wide range of solu­tions for pin insertion applications. Board size capacity up to 17.5" x 17.5" [450x450 mm], quick change tooling packs, and a wide range of options make it a flexible high speed platform. • High speed servo drives for insertion rates up to 5 cycles per second at 0.2 in [5.08 mm] pitch. • Automatic tool changer to apply up to 3 different products on one machine. • Rotary insertion finger can apply prod­ucts at up to 7 different angles without rotating PCB. • Real time insertion force monitoring for 100% quality assurance on press-fit applications. • Able to process any manufacturera reeled through-hole or press-fit products. • Wide range of optional equipment to meet specific customer and application requirements. connectivity