Toggle Clamps
12Pages

{{requestButtons}}

Catalog excerpts

Toggle Clamps - 1

TOGGLE CLAMPS General Information HOLDING CAPACITY The holding capacity listed for each clamp refers to the maximum external force that the clamp can safely resist in its locked position without incurring any permanent deformation. For hold down clamps, holding capacity is measured with the spindle as close as possible to the handle, and will be less at the end of the clamping arm. CLAMPING FORCE Clamping force, the amount of force actually applied to the workpiece by closing and locking the clamp, is generally less than the stated holding capacity. This allows the clamp to have ample capacity to resist external machining forces. Actual clamping force depends on many factors including: spindle position, proper spindle height adjustment, type of spindle used, workpiece material, and the clamp’s mechanical advantage. In most cases roughly 1/2 of the stated holding capacity can be applied by hand with medium effort.

Open the catalog to page 1
Toggle Clamps - 2

TOGGLE CLAMPS Vertical Handle Toggle Clamps • One of the most popular styles of Toggle Clamps • Solid bar allows fixed location of spindle by welding bolt retainer at desired position • U-Bar allows spindle to be located anywhere on bar length • Flanged bases provide optimum holding pressure • T-Handles provide greater clearance for machines • All clamps include spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Vertical Handle Toggle Clamps Part Numbers 34001 and 34003 Bar Opens: 100° Handle Opens: 56° Spindle Type: Bonded Neoprene Spindle Size: #10-24 X...

Open the catalog to page 2
Toggle Clamps - 3

TOGGLE CLAMPS Vertical Handle Toggle Clamps Part Numbers 34023, 34020, 34022, 34025, 34009 Bar Opens: 100° Handle Opens: 60° Spindle Type: Bonded Neoprene Spindle Size: 5/16-18 X 2.50 Base Type Handle Type FLANGED FLANGED FLANGED FLANGED FLANGED STANDARD STANDARD T-HANDLE STANDARD STANDARD Base Type Handle Type ADJUSTABLE ADJUSTABLE SOLID FLANGED FLANGED FLANGED - LONG ADJUSTABLE - ADJUSTABLE 3.86 ADJUSTABLE - SOLID - Long Solid Vertical Handle Toggle Clamps Part Numbers 34030, 34015, 34035 Bar Opens: 105° Handle Opens: 58° Spindle Type: Bonded Neoprene Spindle Size: 3/8-16 X 3.50 STANDARD...

Open the catalog to page 3
Toggle Clamps - 4

TOGGLE CLAMPS Vertical Handle Toggle Clamps Part Numbers 34040, 34041 Bar Opens: 135° Handle Opens: 70° Spindle Type: Hex Head Spindle Size: 1/2-13 X 3.00 Base Type Handle Type ADJUSTABLE SOLID FLANGED FLANGED STANDARD STANDARD Base Type Handle Type ADJUSTABLE SOLID FLANGED FLANGED STANDARD STANDARD Vertical Handle Toggle Clamps Part Numbers 34050, 34029 Bar Opens: 140° Handle Opens: 60° Spindle Type: Hex Head Spindle Size: 1/2-13 X 4.50 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 4
Toggle Clamps - 5

TOGGLE CLAMPS Horizontal Handle Toggle Clamps • U-Bar allows the spindle to be located anywhere on bar length • All clamps supplied with spindle assembly • Handles stay clear of the workpiece while machining • Flanged bases provide optimum holding pressure All TE-CO Toggle Clamps are interchangeable with industry standards Horizontal Handle Toggle Clamps Part Numbers 34105, 34101 Bar Opens: 90° Handle Opens: 80° Spindle Type: Nylon Hex Head Spindle Size: #8-32 X .75 Part No. A B C D E F G H J K L 34105 0.70 3.10 0.34 34101 0.73 3.24 0.42 Base Type Handle Type FLANGED FLANGED STANDARD...

Open the catalog to page 5
Toggle Clamps - 6

TOGGLE CLAMPS Horizontal Handle Toggle Clamps Part Numbers 34113, 34114, 34115 Bar Opens: 90° Handle Opens: 170° Spindle Type: Bonded Neoprene Spindle Size: • #10-24 X 1.38 (34113) • 5/16-18 X 2.50 (34114) • 3/8-16 X 3.50 (34115) Part No. A B C D E F G H J K L 34113 1.47 2.30 0.65 34114 2.49 3.68 0.89 34115 3.73 5.33 1.31 Base Type Handle Type ADJUSTABLE BAR ADJUSTABLE BAR ADJUSTABLE BAR FLANGED FLANGED FLANGED Base Type Handle Type Base Type Handle Type STANDARD STANDARD STANDARD Horizontal Handle Toggle Clamps Part Numbers 34120 Bar Opens: 90° Handle Opens: 65° Spindle Type: Bonded...

Open the catalog to page 6
Toggle Clamps - 7

TOGGLE CLAMPS Straight Line Action Clamps • Clamps provide push/pull forces • Tapped plunger allow use of a variety of spindles and attachments • All clamps supplied with spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Straight Line Action Clamps Part Numbers 34300, 34301, 34302 Spindle Type: Hex Head Spindle Size: • 1/4-20 X .63 (34300) • 5/16-18 X 1.00 (34301) • 3/8-16 X 1.25 (34302) Mounting Type Handle Type Plunger Travel THROUGH HOLE THROUGH HOLE THROUGH HOLE STANDARD STANDARD STANDARD Plunger Travel Spindle Thread External Internal Straight Line...

Open the catalog to page 7
Toggle Clamps - 8

TOGGLE CLAMPS Straight Line Action Clamps Part Number 34306 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 Mounting Type Handle Type Plunger Travel Spindle Thread Mounting Type Handle Type Plunger Travel Spindle Thread Mounting Type Handle Type Plunger Travel Spindle Thread Straight Line Action Clamps Part Number 34310 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 Straight Line Action Clamps Part Number 34320 Spindle Type: Hex Head Spindle Size: 3/8-16 X 1.25 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 8
Toggle Clamps - 9

TOGGLE CLAMPS Straight Line Action Clamps Part Numbers 34340, 34350, 34360, 34309, 34308 Spindle Type: Hex Head Spindle Size: • 5/16-18 X 1.00 (34340) • 3/8-16 X 1.25 (34350, 34360) • 1/2-13 X 2.00 (34309, 34308) Mounting Type Handle Type Plunger Travel Spindle Thread Flange Flange Flange Flange Flange 45 degrees 45 degrees 45 degrees 45 degrees 45 degrees Internal Internal Internal Internal Internal Mounting Type Handle Type Plunger Travel Spindle Thread Flange Flange STANDARD STANDARD Internal Internal Straight Line Action Clamps Part Numbers 34304, 34330 Spindle Type: Hex Head Spindle...

Open the catalog to page 9
Toggle Clamps - 10

TOGGLE CLAMPS Pull Action Clamps Ideal for latching, locking, or fastening doors, fixtures, pressure vessels, covers and hatches on storage tanks All TE-CO Toggle Clamps are interchangeable with industry standards • Flanged Base • Standard Handle Holding Capacity Pull Action Clamps Part Numbers 34409, 34411 Spindle Type: U-Hook • Flanged Base Drawing Movement: • Standard Handle • 3.50” (34409) PART #34409 • 2.19” (34411) Hook Size: • M10 (34409) • M12 (34411) 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 10

All TE-CO catalogs and technical brochures

  1. Plain Clamps

    1 Pages

  2. Hoist Rings

    22 Pages

  3. Toolex Vises

    44 Pages

  4. 5-Axis Vise

    2 Pages

  5. Columns_Plates

    12 Pages

  6. Hoist ring

    22 Pages

  7. Toggle Clamp

    12 Pages