Catalog excerpts
Vertical Handl HOLDING CAPACITY The holding capacity listed for each clamp refers to the maximum exter- nal force that the clamp can safely resist in its locked position without incurring any permanent deforma- tion. For hold down clamps, holding capacity is measured with the spindle as close as possible to the handle, and will be less at the end of the clamp- CLAMPING FORCE Clamping force, the amount of force actually applied to the workpiece by closing and locking the clamp, is generally less than the stated holding capacity. This allows the clamp to have ample capacity to resist exter- nal machining forces. Actual clamp- ing force depends on many factors including: spindle position, proper spindle height adjustment, type of spindle used, workpiece material, and the clamp's mechanical advantage. In most cases roughly 1/2 of the stated holding capacity can be applied by hand with medium effort.
Open the catalog to page 1TOGGLE CLAMPS Vertical Handle Toggle Clamps • One of the most popular styles of Toggle Clamps • Solid bar allows fixed location of spindle by welding bolt retainer at desired position • U-Bar allows spindle to be located anywhere on bar length • Flanged bases provide optimum holding pressure • T-Handles provide greater clearance for machines • All clamps include spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Vertical Handle Toggle Clamps Spindle Type: Bonded Neoprene Vertical Handle Toggle Clamps Spindle Type: Bonded Neoprene 128 937-836-0961 •...
Open the catalog to page 2TOGGLE CLAMPS Vertical Handle Toggle Clamps Spindle Type: Bonded Neoprene Vertical Handle Toggle Clamps 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com 129
Open the catalog to page 3TOGGLE CLAMPS Vertical Handle Toggle Clamps Spindle Type: Hex Head Vertical Handle Toggle Clamps Spindle Type: Hex Head 130 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 4TOGGLE CLAMPS Horizontal Handle Toggle Clamps • U-Bar allows the spindle to be located anywhere on bar length • All clamps supplied with spindle assembly • Handles stay clear of the workpiece while machining • Flanged bases provide optimum holding pressure All TE-CO Toggle Clamps are interchangeable with industry standards Horizontal Handle Toggle Clamps Spindle Type: Nylon Hex Head Horizontal Handle Toggle Clamps Spindle Type: Bonded Neoprene 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 5TOGGLE CLAMPS Horizontal Handle Toggle Clamps Spindle Type: Bonded Neoprene Spindle Size: Horizontal Handle Toggle Clamps Spindle Type: Bonded Neoprene Horizontal Handle Toggle Clamps Spindle Type: Bonded Neoprene 132 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 6TOGGLE CLAMPS Straight Line Action Clamps • Clamps provide push/pull forces •Tapped plunger allow use of a variety • All clamps supplied with spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Straight Line Action Clamps Spindle Type: Hex Head Spindle Size: Straight Line Action Clamps Spindle Type: Hex Head Spindle Size: 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com 133
Open the catalog to page 7TOGGLE CLAMPS Straight Line Action Clamps Spindle Type: Hex Head Straight Line Action Clamps Spindle Type: Hex Head 134 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 8TOGGLE CLAMPS Straight Line Action Clamps Spindle Type: Hex Head Spindle Size: Straight Line Action Clamps Spindle Type: Hex Head Spindle Size: 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com 135
Open the catalog to page 9TOGGLE CLAMPS Pull Action Clamps Ideal for latching, locking, or fastening doors, fixtures, pressure vessels, covers and hatches on storage tanks All TE-CO Toggle Clamps with industry standards Pull Action Clamps Spindle Type: U-Hook Drawing Movement: Hook Size: ' Flanged Base ' Standard Handle Pull Action Clamps Spindle Type: U-Hook Drawing Movement: Hook Size: Flanged Base Standard Handle 136 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 10TOGGLE CLAMPS Pull Action Clamps Spindle Type: U-Hook Drawing Movement: Hook Size: ' Flanged Base ' Standard Handle Pull Action Clamps Spindle Type: U-Hook Drawing Movement: Hook Size: ' Flanged Base ' Standard Handle 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com 137
Open the catalog to page 11TOGGLE CLAMPS Pull Action Clamps Bar Type: Fixed Hook Flanged Base Standard Handle Spindle Assemblies Spindle Assemblies Spindle Assemblies Bolt Retainers 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com
Open the catalog to page 12All TE-CO catalogs and technical brochures
-
Center Clamps
1 Pages
-
Plain Clamps
1 Pages
-
Serrated End Clamps
1 Pages
-
Tooling components
70 Pages
-
Columns & Plates
12 Pages
-
Gaging & Inspection
22 Pages
-
Hoist Rings
22 Pages
-
Spring Plungers
24 Pages
-
Toggle Clamps
12 Pages
-
Toolex Vises
44 Pages
-
Hydraulic Double Acting Vise
2 Pages
-
5-Axis Vise
2 Pages
-
TE-CO PinLock Flyer
2 Pages
-
Spring Loaded Devices
20 Pages
-
SpringLoadedDevices
24 Pages
-
Gaging_Inspection
22 Pages
-
Columns_Plates
12 Pages
-
Hoist ring
22 Pages
-
Magnetic Workholding
4 Pages