table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:31.00pt "Times New Roman", serif; } .font1 { font:7.00pt "Verdana", sans-serif; } .font2 { font:9.00pt "Verdana", sans-serif; } .font3 { font:11.00pt "Verdana", sans-serif; } .font4 { font:12.00pt "Verdana", sans-serif; } .font5 { font:14.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } ProductInformation RotoVAC - Vacuum Plasma Treater lanlecK RotoVAC - Vacuum Plasma Treater Standard and Customised Vacuum Plasma Treaters Tantec RotoVAC plasma treater is designed for plasma treatment of small injection moulded plastic parts, without the need to place them in a jig or use complicated handling systems. With the RotoVAC drum design, simply fill the drum and place it in the vacuum chamber. The rotation will ensure that all parts are treated. TECHNICAL DATA Features: Easy to install and use Fast treatment times In the treating chamber a vacuum builds up to between 1 and 4 mbar before an electrical discharge is created through the integrated plasma electrode. Treatment cycle times are often short, between 20-180 seconds depending on the material and its formulation. The RotoVAC plasma treater is appreciated for its simplicity of operation, reliability in production and fast process speed. Treating gasses such as argon and oxygen can be applied, but in most cases this is not necessary due to the high power exposed by the plasma discharge. RotoVAC uses the advanced Tantec power generator HV-X series as power supply, and specially designed plasma transformers to provide voltage to the plasma electrodes. The rotating drum ensures that all parts are equally treated. The concept includes an extra drum which can be loaded during treatment and simply exchanged with the one in use when the batch is completed. Standard or customised ^ chambers , Vacuum level Process gas Process control Cost efficient surface treatment Vacuum pressure plasma Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . [email protected] Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . [email protected] Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . [email protected] www.tantec.com

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:15.00pt "Verdana", sans-serif; } .font5 { font:17.00pt "Verdana", sans-serif; } .font6 { font:23.00pt "Verdana", sans-serif; } .font7 { font:31.00pt "Verdana", sans-serif; } adhsif COaMMbsion TechnicalData Plasma & Corona Treaters glu鎯ng bonding Features: asy to install and use Connect to mains power and compressed air. High power impact...