| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 1 | | |
| | | XS-2 series | | |
| | | XS-3 series | | |
| | | XS-4 serie | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | Fixation stand | With nipple RI1/2 | With A,B-sensor [K] | | | | | | | | | | |
| | | Material : Main touching gas department SUS | | |
| | | Material : Main touching gas department SUS | | |
| | | |
| | | |
| | | A-sensor (For detecting the outlet hot-air temp.) [K] Incorporated (Compensating wire 5m) B-sensor(For hot-start and overheat prevention) [K] Incorporated (Compensating wire 5m) | | |
| | | Common specification % Standard Rating - Continuation ©Ambient temp. -10° C - +70° C 0 Ambient humidity Less than 90% R.H. (Non-condensation) % Place where is not exposed to wind and rain. (Indoor specification) • Please designate the model and type at the time of the order. | | |
| | | |
| | | |
| | | Material : Main touching gas department SUS | | |
| | | |
| | | |
| | | Permission pressure : Please use less thna the pressure that was entered. A little leakage may occur from screw department. But, it has no problem to performance. | | |
| | | |
| | | | | | | | | | | | | | | | | | Model | XS-2A | XS-2B | XS-2C | XS-3A | XS-3B | XS-3C | XS-4A | XS-4B | XS-4C | | | | Type | 1200-1.5 | 1200-2.4 | 1200-3.8 | 3200-3 | 3200-5 | 3200-10 | 3200-4 | 3200-8 | 3200-12 | | | | | Single-phase 200V | 3-phase 200V | 3-phase 200V | | | | Heater capacity | 1.5kW | 2.4kW 3.8kW | 3kW 5kW 10kW | 4kW 8kW 12kW | | | | Continuation use max. hot-air temp. | 3000 | 350t | 450t | 450TJ | | | | Temp. of supply air | Less than 140° C | Less than 300° C | Less than 230 C | | | | Permission pressure | 58.84kPa | 58.84kPa | 39.2kPa | | | | Max usable gas capacity | 3mVmin | 6mVmin | 6mVmin | | | | Bore of the inlet | p 50 (OP : Rl/2 Nipple) | p 50 Inside : RpV2 Socket | 065 | | | | Bore of the outlet | p50 (OP : Rl/2 Nipple) | <p50 Inside : RpV2 Socket | 065 | | | | Kind of the power cord * Size * Length | Heatproof electric wire * 2mm2 * 0.5m | Without the power cord. (M5 Terminal) | Without the power cord. (M5 Terminal) | | | | Net weight | 1.6kg 1.9kg 2.5kg | 6.5kg 8.5kg | 9.0kg | 7.6kg 8.2kg | 9.9kg | | | | Maching auto-temp. controller | TRC201 | TR30A | TR50A | TRC303 | TRC503 | | | | Open price | ¥49,700 ¥53.300 ¥55,200 | ¥90,000 ¥93,800 | ¥97,400 | ¥147,000 ¥150,700 | ¥154,400 | | | | Option | Fixation stand (With band : For XS-2A - 3A) Both sides nipple processing to the outlet and inlet (R1 Nipple) With A-sensor (For detecting the outlet hot-air temp.) and B-sensor(For hot-start and overheat prevention) Different voltage specification : Single-220V (Only XS-2C) | With A-sensor for detecting the outlet hot-air temp. [K] K600A (Sheath diameter p 3 .2 * Sheath length 200mm * Compensating wire 5m with PTVg C.F.) Different voltage specification : 3-phase 220V 3-phase 380V, 400V, 440V (Only XS-3B and 3C) | Different voltage specification : 3-phase 220V, 380V 3-phase 440V (Only XS-4B and 4C) | | | | Control number (This is the control number for inside the company.) | TIS001S000 TIS001S000 TIS001S000 | TISOO l SOOO TISOO1SOOO TISOO1SOOO | TISOO 1 SOOO TISOO 1 SOOO TISOO 1 SOOO | | | | | | | | | | | | | | | | | |
| | | |
| | | ttention on us | | |
| | | |
| | | | | |
| | | Common specification O Standard Rating - Continuation 0 Ambient temp. -10° C - +70° C 0 Ambient humidity Less than 90% R.H. (Non-condensation) 0 Place where is not exposed to wind and rain. (Indoor specification) • Please designate the model and type at the time of the order. | | |
| | | • Heater snap (smelts) several minutes later by the airless heating if electricity flowed to the heater without supplying air. This time, it may ignite in the case that the combustible was in surroundings because the heater case is a high temp.. Please take the inter-lock circuit with the ventilation resource without fail. (We can not guarantee the snapping of a wire by the melting of the heater.) • Please use the clean air that moisture, oil and dust etc. are not mixing to the ventilation resource. Insulation of the heater falls off and the life of the heater becomes short if moisture, oil and dust etc. mix to the heater inside. The dust that was heated by the heat of the heater changes into the spark and jump out from the hot-air outlet if dust mixes to the inside. It is very dangerous. | | |
| | | |
| | | Material : Heateer case SUS, Electrode flange SS (Metallic silver) | | |
| | | |
| | | |
| | | Permission pressure : Please use less thna the pressure that was entered. A little leakage may occur from screw department. But, it has no problem to performance. | | |
| | | A-sensor K600A (OP) | | |
| | | |
| | | MODEUSL-3 | | MODELSL-6 | | M0DEUSL-3T | | M0DELSL-6T | | |
| | | |
| | | |
| | | Model | | |
| | | SL-3 | | SL-4 | | SL-6 | | SL-3T | | SL-4T | | SL-6T | | |
| | | |
| | | |
| | | |
| | | |
| | | Type | | |
| | | 3200-4 | | |
| | | 3200-4 | | 3200-5 | | 3200-7 | | |
| | | 3200-5 | | 3200-7 | | |
| | | |
| | | |
| | | |
| | | |
| | | Power supply 50/60Hz | | |
| | | 3-phase 200V | | |
| | | 3-phase 200V | | |
| | | |
| | | |
| | | |
| | | Heater capacity | | |
| | | Attachment attitude at usually operation Attachment attitude at hot-start operation When using more than 400' C (XS-2 with A, B-sensor , and XS-4) | | |
| | | 5kW | | 7kW | | |
| | | 4kW | | | 4kW | | 5kW | | 7kW | | |
| | | |
| | | |
| | | | |
| | | |
| | | |
| | | Continuation use max. hot-air temp. | | |
| | | soot: Less than 70° C | | |
| | | soot Less than 70 C | | |
| | | |
| | | |
| | | Temp. of supply air | | |
| | | |
| | | |
| | | |
| | | ^Permission pressure | | |
| | | Impossible | | |
| | | 98kPa | | |
| | | 490kPa | | |
| | | |
| | | |
| | | |
| | | |
| | | Max usable gas capacity | | |
| | | 2.5nf/min | | |
| | | 2.5mVmin | | |
| | | |
| | | |
| | | |
| | | R1V2 Socket | | |
| | | R11/2 Socket | | |
| | | Bore of the inlet | | |
| | | |
| | | |
| | | |
| | | R1V2 Nipple | | |
| | | Bore of the outlet | | | R11/2 Nipple | | |
| | | |
| | | |
| | | |
| | | 2PNCT 4-core * 3.5mm2 * 3m | | Heatproof electric wire * 2mm2 * 1m | | ±20' | | |
| | | Heatproof electric wire * 3.5mm2 * 1m | | |
| | | Kind of the power cord * Size * Length | | |
| | | 2PNCT 4-core * 2mm2 * 3m | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | Net weight | | 5.0kg | | 6.2kg | | 7.5kg | | 5.5kg | | 6.7kg | | 8.0kg | | |
| | | |
| | | |
| | | Maching auto-temp. controller | | |
| | | TR30A | | |
| | | TR30A | | |
| | | Impossible | | |
| | | |
| | | |
| | | Open price | | |
| | | |
| | | ¥101,100 | | ¥104,800 | | ¥1 10,300 | | ¥1 19,500 | | ¥123,200 | | ¥128,700 | | |
| | | |
| | | |
| | | Wet felt insulating material (Heatproof 1200° C Refer to the option catalog), Professional hose nipple for p 38 hose connection (Material SS) 32A Plug (Material SS), PTV8 Hose nipple for detecting pressure (Material BsBM), PTV8 plug (Material SUS) • With A-sensor for detecting the outlet hot-air temp. [K] K600A (Sheath diameter p3 .2 * Sheath length 200mm * Compensating wire 5m with PT1^ C.F.) • Fixation metal fittings SP-030 (2pcs. lset) „ • Adiabatic cover DK89 Outside diameter pp 1 39 * Length 100mm Heatproof 1300 C (Material : Silica alumina) • Different voltage specification : 3-phase 220V 3-phase 380V, "400V, 440V (Only SL-4, 6, 4T, and 6T) | | |
| | | Impossible | | |
| | | Accessories | | |
| | | |
| | | |
| | | This can use with every attachment attitude in the case that outlet hot-air temp. is used less than 400' C. • Please pay attention so as not to flow backward heat when the supply of air is stopped and hot-start operation even in either attachment attitude. Overheat prevention occurs or the power supply interconnection terminal, inside wiring, and terminal etc. may damage in the case that heat flowed backward. So, please suspend the supply of air after cooling operation is conducted without fail. | | |
| | | Option | | |
| | | |
| | | |
| | | Control number (This is the control number for inside the company.) | | |
| | | TISOO 1 SOOO | | TISOO 1 SOOO | | TISOO 1 SOOO | | TISOO 1 SOOO | | TISOO 1 SOOO | | TISOO 1 SOOO | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |